§  2.1077   Compliance information.

   (a) If a product must be tested and authorized under Supplier's
   Declaration of Conformity, a compliance information statement shall be
   supplied with the product at the time of marketing or importation,
   containing the following information:

   (1) Identification of the product, e.g., name and model number;

   (2) A compliance statement as applicable, e.g., for devices subject to
   part 15 of this chapter as specified in § 15.19(a)(3) of this chapter,
   that the product complies with the rules; and

   (3) The identification, by name, address and telephone number or
   Internet contact information, of the responsible party, as defined in
   § 2.909. The responsible party for Supplier's Declaration of Conformity
   must be located within the United States.

   (b) If a product is assembled from modular components (e.g.,
   enclosures, power supplies and CPU boards) that, by themselves, are
   authorized under a Supplier's Declaration of Conformity and/or a grant
   of certification, and the assembled product is also subject to
   authorization under Supplier's Declaration of Conformity but, in
   accordance with the applicable regulations, does not require additional
   testing, the product shall be supplied, at the time of marketing or
   importation, with a compliance information statement containing the
   following information:

   (1) Identification of the assembled product, e.g., name and model
   number.

   (2) Identification of the modular components used in the assembly. A
   modular component authorized under Supplier's Declaration of Conformity
   shall be identified as specified in paragraph (a)(1) of this section. A
   modular component authorized under a grant of certification shall be
   identified by name and model number (if applicable) along with the FCC
   Identifier number.

   (3) A statement that the product complies with part 15 of this chapter.

   (4) The identification, by name, address and telephone number or
   Internet contact information, of the responsible party who assembled
   the product from modular components, as defined in § 2.909. The
   responsible party for Supplier's Declaration of Conformity must be
   located within the United States.

   (5) Copies of the compliance information statements for each modular
   component used in the system that is authorized under Supplier's
   Declaration of Conformity.

   (c) The compliance information statement shall be included in the
   user's manual or as a separate sheet. In cases where the manual is
   provided only in a form other than paper, such as on a computer disk or
   over the Internet, the information required by this section may be
   included in the manual in that alternative form, provided the user can
   reasonably be expected to have the capability to access information in
   that form. The information may be provided electronically as permitted
   in § 2.935.

   [ 82 FR 50829 , Nov. 2, 2017]

   

Radiofrequency Radiation Exposure