Goto Section: 2.1074 | 2.1091 | Table of Contents
FCC 2.1077
Revised as of September 1, 2021
Goto Year:2020 |
2022
§ 2.1077 Compliance information.
(a) If a product must be tested and authorized under Supplier's
Declaration of Conformity, a compliance information statement shall be
supplied with the product at the time of marketing or importation,
containing the following information:
(1) Identification of the product, e.g., name and model number;
(2) A compliance statement as applicable, e.g., for devices subject to
part 15 of this chapter as specified in § 15.19(a)(3) of this chapter,
that the product complies with the rules; and
(3) The identification, by name, address and telephone number or
Internet contact information, of the responsible party, as defined in
§ 2.909. The responsible party for Supplier's Declaration of Conformity
must be located within the United States.
(b) If a product is assembled from modular components (e.g.,
enclosures, power supplies and CPU boards) that, by themselves, are
authorized under a Supplier's Declaration of Conformity and/or a grant
of certification, and the assembled product is also subject to
authorization under Supplier's Declaration of Conformity but, in
accordance with the applicable regulations, does not require additional
testing, the product shall be supplied, at the time of marketing or
importation, with a compliance information statement containing the
following information:
(1) Identification of the assembled product, e.g., name and model
number.
(2) Identification of the modular components used in the assembly. A
modular component authorized under Supplier's Declaration of Conformity
shall be identified as specified in paragraph (a)(1) of this section. A
modular component authorized under a grant of certification shall be
identified by name and model number (if applicable) along with the FCC
Identifier number.
(3) A statement that the product complies with part 15 of this chapter.
(4) The identification, by name, address and telephone number or
Internet contact information, of the responsible party who assembled
the product from modular components, as defined in § 2.909. The
responsible party for Supplier's Declaration of Conformity must be
located within the United States.
(5) Copies of the compliance information statements for each modular
component used in the system that is authorized under Supplier's
Declaration of Conformity.
(c) The compliance information statement shall be included in the
user's manual or as a separate sheet. In cases where the manual is
provided only in a form other than paper, such as on a computer disk or
over the Internet, the information required by this section may be
included in the manual in that alternative form, provided the user can
reasonably be expected to have the capability to access information in
that form. The information may be provided electronically as permitted
in § 2.935.
[ 82 FR 50829 , Nov. 2, 2017]
Radiofrequency Radiation Exposure
Goto Section: 2.1074 | 2.1091
Goto Year: 2020 |
2022
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public