Goto Section: 15.109 | 15.113 | Table of Contents

FCC 15.111
Revised as of October 1, 2018
Goto Year:2017 | 2019
  § 15.111   Antenna power conduction limits for receivers.

   (a) In addition to the radiated emission limits, receivers that operate
   (tune) in the frequency range 30 to 960 MHz and CB receivers that
   provide terminals for the connection of an external receiving antenna
   may be tested to demonstrate compliance with the provisions of § 15.109
   with the antenna terminals shielded and terminated with a resistive
   termination equal to the impedance specified for the antenna, provided
   these receivers also comply with the following: With the receiver
   antenna terminal connected to a resistive termination equal to the
   impedance specified or employed for the antenna, the power at the
   antenna terminal at any frequency within the range of measurements
   specified in § 15.33 shall not exceed 2.0 nanowatts.

   (b) CB receivers and receivers that operate (tune) in the frequency
   range 30 to 960 MHz that are provided only with a permanently attached
   antenna shall comply with the radiated emission limitations in this
   part, as measured with the antenna attached.

   return arrow Back to Top


Goto Section: 15.109 | 15.113

Goto Year: 2017 | 2019
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public