Goto Section: 80.205 | 80.209 | Table of Contents
FCC 80.207
Revised as of October 5, 2017
Goto Year:2016 |
2018
§ 80.207 Classes of emission.
(a) Authorization to use radiotelephone and radiotelegraph emissions by
ship and coast stations includes the use of digital selective calling
and selective calling techniques in accordance with § 80.225.
(b) In radiotelegraphy communications employing a modulated carrier the
carrier must be keyed and modulated by an audio frequency.
(c) Authorization to use single sideband emission is limited to
emitting a carrier;
(1) For full carrier transmitters at a power level between 3 and 6 dB
below peak envelope power;
(2) For suppressed carrier transmitters at a power level at least 40 dB
below peak envelope power; and
(3) For reduced or variable level carrier:
(i) In the 1600-4000 kHz band:
(A) For coast station transmitters 18±2 dB below peak envelope power;
(B) For ship station transmitters installed before January 2, 1982,
16±2 dB below peak envelope power; and
(C) For ship station transmitters installed after January 1, 1982, 18±2
dB below peak envelope power.
(ii) In the 4000-27500 kHz band:
(A) For coast station transmitters 18±2 dB below peak envelope power;
(B) For ship station transmitters installed before January 2, 1978,
16±2 dB below peak envelope power; and
(C) For ship station transmitters installed after January 1, 1978, 18±2
dB below peak envelope power.
(d) The authorized classes of emission are as follows:
Types of stations Classes of emission
Ship Stations^1
Radiotelegraphy:
100-160 kHz A1A.
405-525 kHz A1A, J2A.
1615-27500 kHz:
Manual^15 16 17 A1A, J2A, J2B, J2D.
DSC^6 F1B, J2B.
NB-DP^14 16 F1B, J2B, J2D.
Facsimile F1C, F3C, J2C, J3C.
156-162 MHz^2 F1B, F2B, F2C, F3C, F1D, F2D.
DSC G2B.
216-220 MHz^3 F1B, F2B, F2C, F3C.
1626.5-1646.5 MHz (^4).
Radiotelephony:
1615-27500 kHz^16 H3E, J2D, J3E, R3E.
27.5-470 MHz^6 G3D, G3E.
1626.5-1646.5 MHz (^4).
Radiodetermination:
285-325 kHz^7 A1A, A2A.
405-525 kHz (Direction Finding)^8 A3N, H3N, J3N, NON.
154-459 MHz:^12 A1D, A2D, F1D, F2D, G1D, G2D.
2.4-9.5 GHz PON.
Land Stations^1
Radiotelegraphy:
100-160 kHz A1A.
405-525 kHz A1A, J2A.
1605-2850 kHz:
Manual A1A, J2A.
Facsimile F1C, F3C, J2C, J3C.
Alaska-Fixed A1A, J2A.
4000-27500 kHz:
Manual^16 A1A, J2A, J2B, J2D.
DSC^18 F1B, J2B.
NB-DP^14 18 F1,B J2B, J2D.
Facsimile F1C, F3C, J2C, J3C.
Alaska-Fixed^17 18 A1A, A2A, F1B, F2B, J2B, J2D.
72-76 MHz A1A, A2A, F1B, F2B.
156-162 MHz^2 20 F1B, F2B, F2C, F3C, F1D, F2D.
DSC G2B.
216-220 MHz^3 F1B, F2B, F2C, F3C.
Radiotelephony:
1615-27500 kHz^18 19 H3E, J3E, R3E.
72-76 MHz A3E, F3E, G3E.
156-470 MHz G3E.
Radiodetermination:
2.4-9.6 GHz PON.
Distress, Urgency and Safety^8 9
2182 kHz^10 11 A2B, A3B, H2B, H3E, J2B, J3E.
121.500 MHz A3E, AEX, N0N.
123.100 MHz A3E.
156.750 and 156.800 MHz^13 G3E, G3N.
243.000 MHz A3E, A3X, N0N.
406.0-406.1 MHz G1D.
^1Excludes distress, EPIRBs, survival craft, and automatic link
establishment.
^2Frequencies used for public correspondence and in Alaska 156.425 MHz.
See § § 80.371(c), 80.373(f) and 80.385(b). Transmitters approved before
January 1, 1994, for G3E emissions will be authorized indefinitely for
F2C, F3C, F1D and F2D emissions. Transmitters approved on or after
January 1, 1994, will be authorized for F2C, F3C, F1D or F2D emissions
only if they are approved specifically for each emission designator.
^3Frequencies used in the Automated Maritime Telecommunications System
(AMTS). See § 80.385(b).
^4Types of emission are determined by the INMARSAT Organization.
^5[Reserved]
^6G3D emission must be used only by one-board stations for maneuvering
or navigation.
^7Frequencies used for cable repair operations. See § 80.375(b).
^8For direction finding requirements see § 80.375.
^9Includes distress emissions used by ship, coast, EPIRBs and survival
craft stations.
^10On 2182 kHz A1B, A2B, H2B and J2B emissions indicate transmission of
the auto alarm signals.
^11Ships on domestic voyages must use J3E emission only.
^12For frequencies 154.585 MHz, 159.480 MHz, 160.725 MHz, 160.785 MHz,
454.000 MHz and 459.000 MHz, authorized for offshore radiolocation and
related telecommand operations.
^13[Reserved]
^14NB-DP operations which are not in accordance with ITU-R
Recommendations M.625 or M.476 are permitted to utilize any modulation,
so long as emissions are within the limits set forth in § 80.211(f).
^15J2B is permitted only on 2000-27500 kHz.
^16J2D is permitted only on 2000-27500 kHz, and ship stations employing
J2D emissions shall at no time use a peak envelope power in excess of
1.5 kW per channel.
^17J2B and J2D are permitted provided they do not cause harmful
interference to A1A.
^18Coast stations employing J2D emissions shall at no time use a peak
envelope power in excess of 10 kW per channel.
^19J2D is permitted only on 2000-27500 kHz.
^20If a station uses another type of digital emission, it must comply
with the emission mask requirements of § 90.210 of this chapter, except
that Automatic Identification System (AIS) transmissions do not have to
comply with the emission mask requirements of § 90.210 of this chapter.
[ 51 FR 31213 , Sept. 2, 1986]
Editorial Note: For Federal Register citations affecting § 80.207, see
the List of CFR Sections Affected, which appears in the Finding Aids
section of the printed volume and at www.fdsys.gov.
return arrow Back to Top
Goto Section: 80.205 | 80.209
Goto Year: 2016 |
2018
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public