Goto Section: 51.318 | 51.320 | Table of Contents
FCC 51.319
Revised as of September 1, 2021
Goto Year:2020 |
2022
§ 51.319 Specific unbundling requirements.
(a) Local loops. An incumbent LEC shall provide a requesting
telecommunications carrier with nondiscriminatory access to the local
loop on an unbundled basis, in accordance with section 251(c)(3) of the
Act and this part and as set forth in paragraphs (a)(1) through (8) of
this section. The local loop network element is defined as a
transmission facility between a distribution frame (or its equivalent)
in an incumbent LEC central office and the loop demarcation point at an
end-user customer premises. This element includes all features,
functions, and capabilities of such transmission facility, including
the network interface device. It also includes all electronics,
optronics, and intermediate devices (including repeaters and load
coils) used to establish the transmission path to the end-user customer
premises as well as any inside wire owned or controlled by the
incumbent LEC that is part of that transmission path.
(1) Copper loops. An incumbent LEC shall provide a requesting
telecommunications carrier with nondiscriminatory access to the copper
on an unbundled basis in census blocks defined as rural or urban
cluster by the Census Bureau. A copper loop is a stand-alone local loop
comprised entirely of copper wire or cable. For purposes of this
section, copper loops include only digital copper loops (e.g., DS0s and
integrated services digital network lines) as well as two-wire and
four-wire copper loops conditioned to transmit the digital signals
needed to provide digital subscriber line services, regardless of
whether the copper loops are in service or held as spares. The copper
loop does not include packet switching capabilities as defined in
paragraph (a)(2)(i) of this section. The availability of DS1 and DS3
copper loops is subject to the requirements of paragraphs (a)(4) and
(5) of this section.
(i) Line splitting. An incumbent LEC shall provide a requesting
telecommunications carrier that obtains an unbundled copper loop from
the incumbent LEC with the ability to engage in line splitting
arrangements with another competitive LEC using a splitter collocated
at the central office where the loop terminates into a distribution
frame or its equivalent. Line splitting is the process in which one
competitive LEC provides narrowband voice service over the low
frequency portion of a copper loop and a second competitive LEC
provides digital subscriber line service over the high frequency
portion of that same loop. The high frequency portion of the loop
consists of the frequency range on the copper loop above the range that
carries analog circuit-switched voice transmissions. This portion of
the loop includes the features, functions, and capabilities of the loop
that are used to establish a complete transmission path on the high
frequency range between the incumbent LEC's distribution frame (or its
equivalent) in its central office and the demarcation point at the
end-user customer premises, and includes the high frequency portion of
any inside wire owned or controlled by the incumbent LEC.
(A) An incumbent LEC's obligation, under paragraph (a)(1)(i) of this
section, to provide a requesting telecommunications carrier with the
ability to engage in line splitting applies regardless of whether the
carrier providing voice service provides its own switching or obtains
local circuit switching from the incumbent LEC.
(B) An incumbent LEC must make all necessary network modifications,
including providing nondiscriminatory access to operations support
systems necessary for pre-ordering, ordering, provisioning, maintenance
and repair, and billing for loops used in line splitting arrangements.
(ii) Line conditioning. The incumbent LEC shall condition a copper loop
at the request of the carrier seeking access to a copper loop under
paragraph (a)(1) of this section or a copper subloop under paragraph
(b) of this section to ensure that the copper loop or copper subloop is
suitable for providing digital subscriber line services, whether or not
the incumbent LEC offers advanced services to the end-user customer on
that copper loop or copper subloop. If the incumbent LEC seeks
compensation from the requesting telecommunications carrier for line
conditioning, the requesting telecommunications carrier has the option
of refusing, in whole or in part, to have the line conditioned; and a
requesting telecommunications carrier's refusal of some or all aspects
of line conditioning will not diminish any right it may have, under
paragraphs (a) and (b) of this section, to access the copper loop or
the copper subloop.
(A) Line conditioning is defined as the removal from a copper loop or
copper subloop of any device that could diminish the capability of the
loop or subloop to deliver high-speed switched wireline
telecommunications capability, including digital subscriber line
service. Such devices include, but are not limited to, bridge taps,
load coils, low pass filters, and range extenders.
(B) Incumbent LECs shall recover the costs of line conditioning from
the requesting telecommunications carrier in accordance with the
Commission's forward-looking pricing principles promulgated pursuant to
section 252(d)(1) of the Act and in compliance with rules governing
nonrecurring costs in § 51.507(e).
(C) Insofar as it is technically feasible, the incumbent LEC shall test
and report troubles for all the features, functions, and capabilities
of conditioned copper lines, and may not restrict its testing to voice
transmission only.
(iii) Maintenance, repair, and testing. (A) An incumbent LEC shall
provide, on a nondiscriminatory basis, physical loop test access points
to a requesting telecommunications carrier at the splitter, through a
cross-connection to the requesting telecommunications carrier's
collocation space, or through a standardized interface, such as an
intermediate distribution frame or a test access server, for the
purpose of testing, maintaining, and repairing copper loops and copper
subloops.
(B) An incumbent LEC seeking to utilize an alternative physical access
methodology may request approval to do so from the state commission,
but must show that the proposed alternative method is reasonable and
nondiscriminatory, and will not disadvantage a requesting
telecommunications carrier's ability to perform loop or service
testing, maintenance, or repair.
(iv) Control of the loop and splitter functionality. In situations
where a requesting telecommunications carrier is obtaining access to
the high frequency portion of a copper loop through a line splitting
arrangement, the incumbent LEC may maintain control over the loop and
splitter equipment and functions, and shall provide to the requesting
telecommunications carrier loop and splitter functionality that is
compatible with any transmission technology that the requesting
telecommunications carrier seeks to deploy using the high frequency
portion of the loop, as defined in paragraph (a)(1)(i) of this section,
provided that such transmission technology is presumed to be deployable
pursuant to § 51.230.
(v) Transition period for narrowband loops. Notwithstanding any other
provision of the Commission's rules in this part, an incumbent LEC
shall continue to provide a requesting telecommunications carrier with
nondiscriminatory access to two-wire and four-wire analog voice grade
copper loops, the TDM-features, functions, and capabilities of hybrid
loops, or to a 64 kilobits per second transmission path capable of
voice grade service over the fiber-to-the-home loop or
fiber-to-the-curb loop for 36 months until February 8, 2024, provided
such loop was being provided before February 8, 2021.
(vi) Transition period for digital copper loops and two-wire and
four-wire copper loops conditioned to transmit digital signals.
Notwithstanding the remainder of paragraph (a)(1) of this section, an
incumbent LEC shall continue to provide a requesting telecommunications
carrier with nondiscriminatory access to copper loops as defined in
this section for 48 months until February 10, 2025, provided that the
incumbent LEC began providing such loop no later than February 8, 2023.
Incumbent LECs may raise the rates charged for such loops by no more
than 25 percent during months 37 to 48 of this transition period and
may charge market-based rates after month 48.
(2) Hybrid loops. A hybrid loop is a local loop composed of both fiber
optic cable, usually in the feeder plant, and copper wire or cable,
usually in the distribution plant.(i) Packet switching facilities,
features, functions, and capabilities. An incumbent LEC is not required
to provide unbundled access to the packet switched features, functions
and capabilities of its hybrid loops. Packet switching capability is
the routing or forwarding of packets, frames, cells, or other data
units based on address or other routing information contained in the
packets, frames, cells or other data units, and the functions that are
performed by the digital subscriber line access multiplexers, including
but not limited to the ability to terminate an end-user customer's
copper loop (which includes both a low-band voice channel and a
high-band data channel, or solely a data channel); the ability to
forward the voice channels, if present, to a circuit switch or multiple
circuit switches; the ability to extract data units from the data
channels on the loops; and the ability to combine data units from
multiple loops onto one or more trunks connecting to a packet switch or
packet switches.
(ii) [Reserved]
(3) Fiber loops—(i) Definitions—(A) Fiber-to-the-home loops. A
fiber-to-the-home loop is a local loop consisting entirely of fiber
optic cable, whether dark or lit, serving an end user's customer
premises or, in the case of predominantly residential multiple dwelling
units (MDUs), a fiber optic cable, whether dark or lit, that extends to
the multiunit premises' minimum point of entry (MPOE).
(B) Fiber-to-the-curb loops. A fiber-to-the-curb loop is a local loop
consisting of fiber optic cable connecting to a copper distribution
plant that is not more than 500 feet from the customer's premises or,
in the case of predominantly residential MDUs, not more than 500 feet
from the MDU's MPOE. The fiber optic cable in a fiber-to-the-curb loop
must connect to a copper distribution plant at a serving area interface
from which every other copper distribution subloop also is not more
than 500 feet from the respective customer's premises.
(ii) New builds. An incumbent LEC is not required to provide
nondiscriminatory access to a fiber-to-the-home loop or a
fiber-to-the-curb loop on an unbundled basis when the incumbent LEC
deploys such a loop to an end user's customer premises that previously
has not been served by any loop facility.
(iii) Overbuilds. An incumbent LEC is not required to provide
nondiscriminatory access to a fiber-to-the-home loop or a
fiber-to-the-curb loop on an unbundled basis when the incumbent LEC has
deployed such a loop parallel to, or in replacement of, an existing
copper loop facility, except that:
(A) The incumbent LEC must maintain the existing copper loop connected
to the particular customer premises after deploying the
fiber-to-the-home loop or the fiber-to-the-curb loop and provide
nondiscriminatory access to that copper loop on an unbundled basis
unless the incumbent LEC retires the copper loops pursuant to paragraph
(a)(3)(iv) of this section.
(B) An incumbent LEC that maintains the existing copper loops pursuant
to paragraph (a)(3)(iii)(A) of this section need not incur any expenses
to ensure that the existing copper loop remains capable of transmitting
signals prior to receiving a request for access pursuant to that
paragraph, in which case the incumbent LEC shall restore the copper
loop to serviceable condition upon request.
(iv) Retirement of copper loops or copper subloops. Prior to retiring
any copper loop or copper subloop that has been replaced with a
fiber-to-the-home loop or a fiber-to-the-curb loop, an incumbent LEC
must comply with:
(A) The network disclosure requirements set forth in section 251(c)(5)
of the Act and in § 51.325 through § 51.335; and
(B) Any applicable state requirements.
(4) DS1 loops. (i) Availability of DS1 loops. (A) Subject to the cap
described in paragraph (a)(4)(ii) of this section, an incumbent LEC
shall provide a requesting telecommunications carrier with
nondiscriminatory access to a DS1 loop on an unbundled basis to any
building not served by a wire center with at least 60,000 business
lines and at least four fiber-based collocators, but only if that
building is located in:
(1) Any county or portion of a county served by a price cap incumbent
LEC that is not included on the list of counties that have been deemed
competitive pursuant to the competitive market test established under
§ 69.803 of this chapter; or
(2) Any study area served by a rate-of-return incumbent LEC provided
that study area is not included on the list of competitive study areas
pursuant to the competitive market test established under § 61.50 of
this chapter.
(B) Once a wire center exceeds both the business line and fiber-based
collocator thresholds, no future DS1 loop unbundling will be required
in that wire center. A DS1 loop is a digital local loop having a total
digital signal speed of 1.544 megabytes per second. DS1 loops include,
but are not limited to, two-wire and four-wire copper loops capable of
providing high-bit rate digital subscriber line services, including T1
services.
(ii) Cap on unbundled DS1 loop circuits. A requesting
telecommunications carrier may obtain a maximum of ten unbundled DS1
loops to any single building in which DS1 loops are available as
unbundled loops.
(iii) Transition period. Notwithstanding paragraph (a)(4)(i) of this
section, an incumbent LEC shall continue to provide a requesting
telecommunications carrier with nondiscriminatory access to DS1 loops
for 42 months until August 8, 2024, provided the incumbent LEC began
providing such loop no later than February 8, 2023.
(5) DS3 loops. (i) Availability of DS3 loops. (A) Subject to the cap
described in paragraph (a)(5)(ii) of this section, an incumbent LEC
shall provide a requesting telecommunications carrier with
nondiscriminatory access to a DS3 loop on an unbundled basis to any
building not served by a wire center with at least 38,000 business
lines and at least four fiber-based collocators, but only if that
building is located in one of the following:
(1) Any county or portion of a county served by a price cap incumbent
LEC that is not included on the list of counties that have been deemed
competitive pursuant to the competitive market test established under
§ 69.803 of this chapter; or
(2) Any study area served by a rate-of-return incumbent LEC provided
that study area is not included on the list of competitive study areas
pursuant to the competitive market test established under § 61.50 of
this chapter.
(B) Once a wire center exceeds the business line and fiber-based
collocator thresholds, no future DS3 loop unbundling will be required
in that wire center. A DS3 loop is a digital local loop having a total
digital signal speed of 44.736 megabytes per second.
(ii) Cap on unbundled DS3 loop circuits. A requesting
telecommunications carrier may obtain a maximum of a single unbundled
DS3 loop to any single building in which DS3 loops are available as
unbundled loops.
(iii) Transition period. Notwithstanding paragraph (a)(5)(i) of this
section, an incumbent LEC shall continue to provide a requesting
telecommunications carrier with nondiscriminatory access to DS3 loops
for 36 months after until February 8, 2024, provided such loop was
being provided before February 8, 2021.
(6) Dark fiber loops. An incumbent LEC is not required to provide
requesting telecommunications carriers with access to a dark fiber loop
on an unbundled basis. Dark fiber is fiber within an existing fiber
optic cable that has not yet been activated through optronics to render
it capable of carrying communications services.
(7) Routine network modifications. (i) An incumbent LEC shall make all
routine network modifications to unbundled loop facilities used by
requesting telecommunications carriers where the requested loop
facility has already been constructed. An incumbent LEC shall perform
these routine network modifications to unbundled loop facilities in a
nondiscriminatory fashion, without regard to whether the loop facility
being accessed was constructed on behalf, or in accordance with the
specifications, of any carrier.
(ii) A routine network modification is an activity that the incumbent
LEC regularly undertakes for its own customers. Routine network
modifications include, but are not limited to, rearranging or splicing
of cable; adding an equipment case; adding a doubler or repeater;
adding a smart jack; installing a repeater shelf; adding a line card;
deploying a new multiplexer or reconfiguring an existing multiplexer;
and attaching electronic and other equipment that the incumbent LEC
ordinarily attaches to a DS1 loop to activate such loop for its own
customer. Routine network modifications may entail activities such as
accessing manholes, deploying bucket trucks to reach aerial cable, and
installing equipment casings. Routine network modifications do not
include the construction of a new loop, or the installation of new
aerial or buried cable for a requesting telecommunications carrier.
(8) Engineering policies, practices, and procedures. An incumbent LEC
shall not engineer the transmission capabilities of its network in a
manner, or engage in any policy, practice, or procedure, that disrupts
or degrades access to a local loop or subloop, including the time
division multiplexing-based features, functions, and capabilities of a
hybrid loop, for which a requesting telecommunications carrier may
obtain or has obtained access pursuant to paragraph (a) of this
section.
(b) Subloops and network interface devices. An incumbent LEC shall
provide a requesting telecommunications carrier with nondiscriminatory
access to subloops on an unbundled basis in accordance with section
251(c)(3) of the Act and this part and as set forth in this paragraph
(b), provided that the underlying loop is available as set forth in
paragraph (a) of this section. Notwithstanding any other provision of
the Commission's rules in this part, an incumbent LEC shall continue to
provide a requesting telecommunications carrier with nondiscriminatory
access to the subloop for access to multiunit premises wiring and
network interface devices on an unbundled basis for 36 months until
February 8, 2024, provided such subloop or network interface device was
being provided before February 8, 2021.
(1) Copper subloops. An incumbent LEC shall provide a requesting
telecommunications carrier with nondiscriminatory access to a copper
subloop on an unbundled basis. A copper subloop is a portion of a
copper loop, or hybrid loop, comprised entirely of copper wire or
copper cable that acts as a transmission facility between any point of
technically feasible access in an incumbent LEC's outside plant,
including inside wire owned or controlled by the incumbent LEC, and the
end-user customer premises. A copper subloop includes all intermediate
devices (including repeaters and load coils) used to establish a
transmission path between a point of technically feasible access and
the demarcation point at the end-user customer premises, and includes
the features, functions, and capabilities of the copper loop. Copper
subloops include two-wire and four-wire analog voice-grade subloops as
well as two-wire and four-wire subloops conditioned to transmit the
digital signals needed to provide digital subscriber line services,
regardless of whether the subloops are in service or held as spares.
(i) Point of technically feasible access. A point of technically
feasible access is any point in the incumbent LEC's outside plant where
a technician can access the copper wire within a cable without removing
a splice case. Such points include, but are not limited to, a pole or
pedestal, the serving area interface, the network interface device, the
minimum point of entry, any remote terminal, and the
feeder/distribution interface. An incumbent LEC shall, upon a
site-specific request, provide access to a copper subloop at a splice
near a remote terminal. The incumbent LEC shall be compensated for
providing this access in accordance with § § 51.501 through 51.515.
(ii) Rules for collocation. Access to the copper subloop is subject to
the Commission's collocation rules at § § 51.321 and 51.323.
(2) [Reserved]
(3) Other subloop provisions— (i) Technical feasibility. If parties are
unable to reach agreement through voluntary negotiations as to whether
it is technically feasible, or whether sufficient space is available,
to unbundle a copper subloop at the point where a telecommunications
carrier requests, the incumbent LEC shall have the burden of
demonstrating to the state commission, in state proceedings under
section 252 of the Act, that there is not sufficient space available,
or that it is not technically feasible to unbundle the subloop at the
point requested.
(ii) Best practices. Once one state commission has determined that it
is technically feasible to unbundle subloops at a designated point, an
incumbent LEC in any state shall have the burden of demonstrating to
the state commission, in state proceedings under section 252 of the
Act, that it is not technically feasible, or that sufficient space is
not available, to unbundle its own loops at such a point.
(c) Dedicated transport. An incumbent LEC shall provide a requesting
telecommunications carrier with nondiscriminatory access to dedicated
transport on an unbundled basis, in accordance with section 251(c)(3)
of the Act and this part, as set forth in paragraphs (d) through (d)(4)
of this section. A “route” is a transmission path between one of an
incumbent LEC's wire centers or switches and another of the incumbent
LEC's wire centers or switches. A route between two points (e.g., wire
center or switch “A” and wire center or switch “Z”) may pass through
one or more intermediate wire centers or switches (e.g., wire center or
switch “X”). Transmission paths between identical end points (e.g.,
wire center or switch “A” and wire center or switch “Z”) are the same
“route,” irrespective of whether they pass through the same
intermediate wire centers or switches, if any.
(1) Definition. For purposes of this section, dedicated transport
includes incumbent LEC transmission facilities between wire centers or
switches owned by incumbent LECs, or between wire centers or switches
owned by incumbent LECs and switches owned by requesting
telecommunications carriers, including, but not limited to, DS1-, DS3-,
and OCn-capacity level services, as well as dark fiber, dedicated to a
particular customer or carrier.
(2) Availability. (i) Entrance facilities. An incumbent LEC is not
obligated to provide a requesting carrier with unbundled access to
dedicated transport that does not connect a pair of incumbent LEC wire
centers.
(ii) Dedicated DS1 transport. Dedicated DS1 transport shall be made
available to requesting carriers on an unbundled basis as set forth in
paragraphs (d)(2)(ii)(A) and (B) of this section. Dedicated DS1
transport consists of incumbent LEC interoffice transmission facilities
that have a total digital signal speed of 1.544 megabytes per second
and are dedicated to a particular customer or carrier.
(A) General availability of DS1 transport. Incumbent LECs shall
unbundle DS1 transport between any pair of incumbent LEC wire centers
except where, through application of tier classifications described in
paragraph (d)(3) of this section, both wire centers defining the route
are Tier 1 wire centers. As such, an incumbent LEC must unbundle DS1
transport if a wire center at either end of a requested route is not a
Tier 1 wire center, or if neither is a Tier 1 wire center.
(B) Cap on unbundled DS1 transport circuits. A requesting
telecommunications carrier may obtain a maximum of ten unbundled DS1
dedicated transport circuits on each route where DS1 dedicated
transport is available on an unbundled basis.
(iii) Dedicated DS3 transport. Dedicated DS3 transport shall be made
available to requesting carriers on an unbundled basis as set forth in
paragraphs (d)(2)(iii)(A) and(B) of this section. Dedicated DS3
transport consists of incumbent LEC interoffice transmission facilities
that have a total digital signal speed of 44.736 megabytes per second
and are dedicated to a particular customer or carrier.
(A) General availability of DS3 transport. Incumbent LECs shall
unbundle DS3 transport between any pair of incumbent LEC wire centers
except where, through application of tier classifications described in
paragraph (d)(3) of this section, both wire centers defining the route
are either Tier 1 or Tier 2 wire centers. As such, an incumbent LEC
must unbundle DS3 transport if a wire center on either end of a
requested route is a Tier 3 wire center.
(B) Cap on unbundled DS3 transport circuits. A requesting
telecommunications carrier may obtain a maximum of 12 unbundled DS3
dedicated transport circuits on each route where DS3 dedicated
transport is available on an unbundled basis.
(iv) Dark fiber transport. Dark fiber transport consists of unactivated
optical interoffice transmission facilities. Incumbent LECs shall
unbundle dark fiber transport between any pair of incumbent LEC wire
centers except where, through application of tier classifications
described in paragraph (d)(3) of this section, both wire centers
defining the route are either Tier 1, Tier 2, or a Tier 3 wire center
identified on the list of wire centers that has been found to be within
a half mile of alternative fiber pursuant to the Report and Order on
Remand and Memorandum Opinion and Order in WC Docket No. 18-14, FCC
19-66 (released July 12, 2019). An incumbent LEC must unbundle dark
fiber transport only if a wire center on either end of a requested
route is a Tier 3 wire center that is not on the published list of wire
centers. Notwithstanding any other provision of the Commission's rules
in this part, an incumbent LEC shall continue to provide a requesting
telecommunications carrier with nondiscriminatory access to dark fiber
transport for eight years until February 8, 2029, provided such dark
fiber transport was being provided before February 8, 2021.
(3) Wire center tier structure. For purposes of this section, incumbent
LEC wire centers shall be classified into three tiers, defined as
follows:
(i) Tier 1 wire centers are those incumbent LEC wire centers that
contain at least four fiber-based collocators, at least 38,000 business
lines, or both. Tier 1 wire centers also are those incumbent LEC tandem
switching locations that have no line-side switching facilities, but
nevertheless serve as a point of traffic aggregation accessible by
competitive LECs. Once a wire center is determined to be a Tier 1 wire
center, that wire center is not subject to later reclassification as a
Tier 2 or Tier 3 wire center.
(ii) Tier 2 wire centers are those incumbent LEC wire centers that are
not Tier 1 wire centers, but contain at least 3 fiber-based
collocators, at least 24,000 business lines, or both. Once a wire
center is determined to be a Tier 2 wire center, that wire center is
not subject to later reclassification as a Tier 3 wire center.
(iii) Tier 3 wire centers are those incumbent LEC wire centers that do
not meet the criteria for Tier 1 or Tier 2 wire centers.
(4) Routine network modifications. (i) An incumbent LEC shall make all
routine network modifications to unbundled dedicated transport
facilities used by requesting telecommunications carriers where the
requested dedicated transport facilities have already been constructed.
An incumbent LEC shall perform all routine network modifications to
unbundled dedicated transport facilities in a nondiscriminatory
fashion, without regard to whether the facility being accessed was
constructed on behalf, or in accordance with the specifications, of any
carrier.
(ii) A routine network modification is an activity that the incumbent
LEC regularly undertakes for its own customers. Routine network
modifications include, but are not limited to, rearranging or splicing
of cable; adding an equipment case; adding a doubler or repeater;
installing a repeater shelf; and deploying a new multiplexer or
reconfiguring an existing multiplexer. They also include activities
needed to enable a requesting telecommunications carrier to light a
dark fiber transport facility. Routine network modifications may entail
activities such as accessing manholes, deploying bucket trucks to reach
aerial cable, and installing equipment casings. Routine network
modifications do not include the installation of new aerial or buried
cable for a requesting telecommunications carrier.
(d) 911 and E911 databases. An incumbent LEC shall provide a requesting
telecommunications carrier with nondiscriminatory access to 911 and
E911 databases on an unbundled basis, in accordance with section
251(c)(3) of the Act and this part.
(e) Operations support systems. An incumbent LEC shall provide a
requesting telecommunications carrier with nondiscriminatory access to
operations support systems on an unbundled basis only when it is used
to manage other unbundled network elements, local interconnection, or
local number portability, in accordance with section 251(c)(3) of the
Act and this part. Operations support system functions consist of
pre-ordering, ordering, provisioning, maintenance and repair, and
billing functions supported by an incumbent LEC's databases and
information. An incumbent LEC, as part of its duty to provide access to
the pre-ordering function, shall provide the requesting
telecommunications carrier with nondiscriminatory access to the same
detailed information about the loop that is available to the incumbent
LEC.
[ 68 FR 52295 , Sept. 4, 2003, as amended at 68 FR 64000 , Nov. 12, 2003;
69 FR 54591 , Sept. 9, 2004; 69 FR 77953 , Dec. 29, 2004; 70 FR 8953 ,
Feb. 24, 2005: 78 FR 5746 , Jan. 28, 2013; 86 FR 1673 , Jan. 8, 2021; 86 FR 8872 , Feb. 10, 2021]
Goto Section: 51.318 | 51.320
Goto Year: 2020 |
2022
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public