Goto Section: 2.1076 | 2.1091 | Table of Contents

FCC 2.1077
Revised as of October 2, 2015
Goto Year:2014 | 2016
  § 2.1077   Compliance information.

   (a)  If a product must be tested and authorized under a Declaration of
   Conformity, a compliance information statement shall be supplied with the
   product at the time of marketing or importation, containing the following
   information:

   (1) Identification of the product, e.g., name and model number;

   (2) A statement, similar to that contained in § 15.19(a)(3) of this chapter,
   that the product complies with part 15 of this chapters; and

   (3)  The identification, by name, address and telephone number, of the
   responsible  party,  as defined in § 2.909. The responsible party for a
   Declaration of Conformity must be located within the United States.

   (b) If a product is assembled from modular components that, by themselves,
   are  authorized  under  a  Declaration of Conformity and/or a grant of
   certification, and the assembled product is also subject to authorization
   under a Declaration of Conformity but, in accordance with the applicable
   regulations, does not require additional testing, the product shall be
   supplied,  at  the time of marketing or importation, with a compliance
   information statement containing the following information:

   (1) Identification of the assembled product, e.g., name and model number.

   (2) Identification of the modular components used in the assembly. A modular
   component authorized under a Declaration of Conformity shall be identified
   as  specified in paragraph (a)(1) of this section. A modular component
   authorized under a grant of certification shall be identified by name and
   model number (if applicable) along with the FCC Identifier number.

   (3) A statement that the product complies with part 15 of this chapter.

   (4)  The identification, by name, address and telephone number, of the
   responsible party who assembled the product from modular components, as
   defined in § 2.909. The responsible party for a Declaration of Conformity
   must be located within the United States.

   (5)  Copies  of the compliance information statements for each modular
   component used in the system that is authorized under a Declaration of
   Conformity.

   (c) The compliance information statement shall be included in the user's
   manual or as a separate sheet. In cases where the manual is provided only in
   a form other than paper, such as on a computer disk or over the Internet,
   the information required by this section may be included in the manual in
   that alternative form, provided the user can reasonably be expected to have
   the capability to access information in that form.

   [ 61 FR 31048 , June 19, 1996, as amended at  62 FR 41880 , Aug. 4, 1997;  69 FR 71383 , Dec. 9, 2004]

   return arrow Back to Top

Radiofrequency Radiation Exposure

   return arrow Back to Top


Goto Section: 2.1076 | 2.1091

Goto Year: 2014 | 2016
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public