Goto Section: 1.1306 | 1.1308 | Table of Contents

FCC 1.1307
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  1.1307   Actions that may have a significant environmental effect, for which
Environmental Assessments (EAs) must be prepared.

   (a) Commission actions with respect to the following types of facilities may
   significantly affect the environment and thus require the preparation of EAs
   by  the  applicant  (see   Sec.  Sec. 1.1308 and 1.1311) and may require further
   Commission environmental processing ( see  Sec.  Sec. 1.1314, 1.1315 and 1.1317):

   (1) Facilities that are to be located in an officially designated wilderness
   area.

   (2) Facilities that are to be located in an officially designated wildlife
   preserve.

   (3) Facilities that: (i) May affect listed threatened or endangered species
   or  designated critical habitats; or (ii) are likely to jeopardize the
   continued existence of any proposed endangered or threatened species or
   likely to result in the destruction or adverse modification of proposed
   critical habitats, as determined by the Secretary of the Interior pursuant
   to the Endangered Species Act of 1973.

   Note: The list of endangered and threatened species is contained in 50 CFR
   17.11, 17.22, 222.23(a) and 227.4. The list of designated critical habitats
   is contained in 50 CFR 17.95, 17.96 and part 226. To ascertain the status of
   proposed species and habitats, inquiries may be directed to the Regional
   Director of the Fish and Wildlife Service, Department of the Interior.

   (4) Facilities that may affect districts, sites, buildings, structures or
   objects,  significant  in  American history, architecture, archeology,
   engineering or culture, that are listed, or are eligible for listing, in the
   National Register of Historic Places. (See 16 U.S.C. 470w(5); 36 CFR part 60
   and 800.) To ascertain whether a proposed action may affect properties that
   are listed or eligible for listing in the National Register of Historic
   Places, an applicant shall follow the procedures set forth in the rules of
   the Advisory Council on Historic Preservation, 36 CFR part 800, as modified
   and  supplemented  by  the  Nationwide  Programmatic Agreement for the
   Collocation of Wireless Antennas, Appendix B to Part 1 of this Chapter, and
   the Nationwide Programmatic Agreement Regarding the Section 106 National
   Historic Preservation Act Review Process, Appendix C to Part 1 of this
   Chapter.

   (5) Facilities that may affect Indian religious sites.

   (6) Facilities to be located in a flood Plain ( See Executive Order 11988.)

   (7) Facilities whose construction will involve significant change in surface
   features (e.g., wetland fill, deforestation or water diversion). (In the
   case of wetlands on Federal property, see Executive Order 11990.)

   (8) Antenna towers and/or supporting structures that are to be equipped with
   high  intensity  white  lights  which are to be located in residential
   neighborhoods, as defined by the applicable zoning law.

   (b) In addition to the actions listed in paragraph (a) of this section,
   Commission actions granting construction permits, licenses to transmit or
   renewals thereof, equipment authorizations or modifications in existing
   facilities, require the preparation of an Environmental Assessment (EA) if
   the particular facility, operation or transmitter would cause human exposure
   to levels of radiofrequency radiation in excess of the limits in  Sec.  Sec. 1.1310
   and 2.1093 of this chapter. Applications to the Commission for construction
   permits, licenses to transmit or renewals thereof, equipment authorizations
   or modifications in existing facilities must contain a statement confirming
   compliance with the limits unless the facility, operation, or transmitter is
   categorically excluded, as discussed below. Technical information showing
   the  basis for this statement must be submitted to the Commission upon
   request. Such compliance statements may be omitted from license applications
   for transceivers subject to the certification requirement in  Sec. 25.129 of this
   chapter.

   (1) The appropriate exposure limits in  Sec.  Sec. 1.1310 and 2.1093 of this chapter
   are generally applicable to all facilities, operations and transmitters
   regulated by the Commission. However, a determination of compliance with the
   exposure limits in  Sec. 1.1310 or  Sec. 2.1093 of this chapter (routine environmental
   evaluation),  and  preparation of an EA if the limits are exceeded, is
   necessary only for facilities, operations and transmitters that fall into
   the categories listed in table 1, or those specified in paragraph (b)(2) of
   this  section.  All  other facilities, operations and transmitters are
   categorically excluded from making such studies or preparing an EA, except
   as indicated in paragraphs (c) and (d) of this section. For purposes of
   table  1,  building-mounted antennas means antennas mounted in or on a
   building structure that is occupied as a workplace or residence. The term
   power  in  column  2 of table 1 refers to total operating power of the
   transmitting operation in question in terms of effective radiated power
   (ERP), equivalent isotropically radiated power (EIRP), or peak envelope
   power  (PEP),  as defined in  Sec. 2.1 of this chapter. For the case of the
   Cellular Radiotelephone Service, subpart H of part 22 of this chapter; the
   Personal Communications Service, part 24 of this chapter and the Specialized
   Mobile Radio Service, part 90 of this chapter, the phrase total power of all
   channels in column 2 of table 1 means the sum of the ERP or EIRP of all
   co-located simultaneously operating transmitters owned and operated by a
   single licensee. When applying the criteria of table 1, radiation in all
   directions should be considered. For the case of transmitting facilities
   using sectorized transmitting antennas, applicants and licensees should
   apply the criteria to all transmitting channels in a given sector, noting
   that  for  a  highly  directional  antenna  there is relatively little
   contribution to ERP or EIRP summation for other directions.

   Table  1—Transmitters,  Facilities  and  Operations Subject to Routine
   Environmental Evaluation
   Service (title 47 CFR rule part) Evaluation required if:
   Experimental Radio Services (part 5) Power > 100 W ERP (164 W EIRP).
   Paging   and   Radiotelephone   Service   (subpart   E   of  part  22)
   Non-building-mounted antennas: height above ground level to lowest point of
   antenna < 10 m and power > 1000 W ERP (1640 W EIRP).
      Building-mounted antennas: power > 1000 W ERP (1640 W EIRP).
   Cellular Radiotelephone Service (subpart H of part 22) Non-building-mounted
   antennas: height above ground level to lowest point of antenna < 10 m and
   total power of all channels > 1000 W ERP (1640 W EIRP).
      Building-mounted antennas: total power of all channels > 1000 W ERP (1640
   W EIRP).
   Personal Communications Services (part 24) (1) Narrowband PCS (subpart D):
        Non-building-mounted antennas: height above ground level to lowest
   point of antenna < 10 m and total power of all channels > 1000 W ERP (1640 W
   EIRP).
        Building-mounted antennas: total power of all channels > 1000 W ERP
   (1640 W EIRP).
      (2) Broadband PCS (subpart E):
        Non-building-mounted antennas: height above ground level to lowest
   point of antenna < 10 m and total power of all channels > 2000 W ERP (3280 W
   EIRP).
        Building-mounted antennas: total power of all channels > 2000 W ERP
   (3280 W EIRP).
   Satellite Communications Services (part 25) All included.
      In addition, for NGSO subscriber equipment, licensees are required to
   attach a label to subscriber transceiver antennas that:
        (1) provides adequate notice regarding potential radiofrequency safety
   hazards, e.g., information regarding the safe minimum separation distance
   required between users and transceiver antennas; and
        (2) references the applicable FCC-adopted limits for radiofrequency
   exposure specified in  Sec. 1.1310 of this chapter.
   Miscellaneous Wireless Communications Services (part 27 except subpart M)
   (1) For the 1390–1392 MHz, 1392–1395 MHz, 1432–1435 MHz, 1670–1675 MHz, and
   2385–2390 MHz bands:
        Non-building-mounted antennas: height above ground level to lowest
   point of antenna < 10 m and total power of all channels > 2000 W ERP (3280 W
   EIRP).
        Building-mounted antennas: total power of all channels > 2000 W ERP
   (3280 W EIRP).
      (2) For the 698–746 MHz, 746–764 MHz, 776–794 MHz, 2305–2320 MHz, and
   2345–2360 MHz bands:
        Total power of all channels > 1000 W ERP (1640 W EIRP).
   Broadband Radio Service and Educational Broadband Service (subpart M of part
   27) Non-building-mounted antennas: height above ground level to lowest point
   of antenna < 10 m and power > 1640 W EIRP.
      Building-mounted antennas: power > 1640 W EIRP.
       BRS and EBS licensees are required to attach a label to subscriber
   transceiver or transverter antennas that:
      (1) provides adequate notice regarding potential radiofrequency safety
   hazards, e.g., information regarding the safe minimum separation distance
   required between users and transceiver antennas; and
      (2) references the applicable FCC-adopted limits for radiofrequency
   exposure specified in  Sec. 1.1310.
   Radio Broadcast Services (part 73) All included.
   Experimental  Radio,  Auxiliary,  Special  Broadcast and Other Program
   Distributional Services (part 74) Subparts A, G, L: power > 100 W ERP.
   Stations in the Maritime Services (part 80) Ship earth stations only.
   Private Land Mobile Radio Services Paging Operations (subpart P of part 90)
   Non-building-mounted antennas: height above ground level to lowest point of
   antenna < 10 m and power > 1000 W ERP (1640 W EIRP).
      Building-mounted antennas: power > 1000 W ERP (1640 W EIRP).
   Private Land Mobile Radio Services Specialized Mobile Radio (subpart S of
   part 90) Non-building-mounted antennas: height above ground level to lowest
   point of antenna < 10 m and total power of all channels > 1000 W ERP (1640 W
   EIRP).
      Building-mounted antennas: Total power of all channels > 1000 W ERP (1640
   W EIRP).
   Amateur Radio Service (part 97) Transmitter output power > levels specified
   in  Sec. 97.13(c)(1) of this chapter.
   Local Multipoint Distribution Service (subpart L of part 101) and 24 GHz
   (subpart G of part 101) Non-building-mounted antennas: height above ground
   level to lowest point of antenna < 10 m and power > 1640 W EIRP.
      Building-mounted antennas: power > 1640 W EIRP.
      LMDS and 24 GHz Service licensees are required to attach a label to
   subscriber transceiver antennas that:
        (1) provides adequate notice regarding potential radiofrequency safety
   hazards, e.g., information regarding the safe minimum separation distance
   required between users and transceiver antennas; and
        (2) references the applicable FCC-adopted limits for radiofrequency
   exposure specified in  Sec. 1.1310.
   70/80/90 GHz Bands (subpart Q of part 101) Non-building-mounted antennas:
   height above ground level to lowest point of antenna < 10 m and power > 1640
   W EIRP.
      Building-mounted antennas: power > 1640 W EIRP.
      Licensees are required to attach a label to transceiver antennas that:
        (1) provides adequate notice regarding potential radiofrequency safety
   hazards, e.g., information regarding the safe minimum separation distance
   required between users and transceiver antennas; and
        (2) references the applicable FCC-adopted limits for radiofrequency
   exposure specified in  Sec. 1.1310.

   (2) Mobile and portable transmitting devices that operate in the Cellular
   Radiotelephone Service, the Personal Communications Services (PCS), the
   Satellite Communications Services, the Wireless Communications Service, the
   Maritime Services (ship earth stations only), the Specialized Mobile Radio
   Service, and the 3650MHz Wireless Broadband Service authorized under Subpart
   H of parts 22, 24, 25, 27, 80, and 90 of this chapter are subject to routine
   environmental evaluation for RF exposure prior to equipment authorization or
   use, as specified in  Sec.  Sec. 2.1091 and 2.1093 of this chapter. Unlicensed PCS,
   unlicensed NII and millimeter wave devices are also subject to routine
   environmental evaluation for RF exposure prior to equipment authorization or
   use, as specified in  Sec.  Sec. 15.253(f), 15.255(g), 15.319(i), and 15.407(f) of
   this  chapter. Portable transmitting equipment for use in the Wireless
   Medical  Telemetry  Service  (WMTS)  is subject to routine environment
   evaluation as specified in  Sec.  Sec. 2.1093 and 5.1125 of this chapter. Equipment
   authorized for use in the Medical Implant Communications Service (MICS) as a
   medical implant transmitter (as defined in Appendix 1 to Subpart E of part
   95 of this chapter) is subject to routine environmental evaluation for RF
   exposure prior to equipment authorization, as specified in  Sec. 2.1093 of this
   chapter  by  finite  difference  time domain computational modeling or
   laboratory measurement techniques. Where a showing is based on computational
   modeling, the Commission retains the discretion to request that specific
   absorption rate measurement data be submitted. All other mobile, portable,
   and unlicensed transmitting devices are categorically excluded from routine
   environmental evaluation for RF exposure under  Sec.  Sec. 2.1091, 2.1093 of this
   chapter except as specified in paragraphs (c) and (d) of this section.

   (3) In general, when the guidelines specified in  Sec. 1.1310 are exceeded in an
   accessible area due to the emissions from multiple fixed transmitters,
   actions  necessary  to  bring  the area into compliance are the shared
   responsibility of all licensees whose transmitters produce, at the area in
   question, power density levels that exceed 5% of the power density exposure
   limit applicable to their particular transmitter or field strength levels
   that, when squared, exceed 5% of the square of the electric or magnetic
   field strength limit applicable to their particular transmitter. Owners of
   transmitter sites are expected to allow applicants and licensees to take
   reasonable steps to comply with the requirements contained in  Sec. 1.1307(b)
   and, where feasible, should encourage co-location of transmitters and common
   solutions for controlling access to areas where the RF exposure limits
   contained in  Sec. 1.1310 might be exceeded.

   (i)  Applicants  for  proposed  (not otherwise excluded) transmitters,
   facilities or modifications that would cause non-compliance with the limits
   specified in  Sec. 1.1310 at an accessible area previously in compliance must
   submit an EA if emissions from the applicant's transmitter or facility would
   result, at the area in question, in a power density that exceeds 5% of the
   power density exposure limit applicable to that transmitter or facility or
   in a field strength that, when squared, exceeds 5% of the square of the
   electric or magnetic field strength limit applicable to that transmitter or
   facility.

   (ii) Renewal applicants whose (not otherwise excluded) transmitters or
   facilities  contribute  to  the  field strength or power density at an
   accessible area not in compliance with the limits specified in  Sec. 1.1310 must
   submit an EA if emissions from the applicant's transmitter or facility
   results, at the area in question, in a power density that exceeds 5% of the
   power density exposure limit applicable to that transmitter or facility or
   in a field strength that, when squared, exceeds 5% of the square of the
   electric or magnetic field strength limit applicable to that transmitter of
   facility.

   (4) Transition Provisions. Applications filed with the Commission prior to
   October 15, 1997 (or January 1, 1998, for the Amateur Radio Service only),
   for  construction  permits,  licenses to transmit or renewals thereof,
   modifications in existing facilities or other authorizations or renewals
   thereof  require the preparation of an Environmental Assessment if the
   particular facility, operation or transmitter would cause human exposure to
   levels of radiofrequency radiation that are in excess of the requirements
   contained in paragraphs (b)(4)(i) through (b)(4)(iii) of this section. In
   accordance with  Sec. 1.1312, if no new application or Commission action is
   required for a licensee to construct a new facility or physically modify an
   existing facility, e.g., geographic area licensees, and construction begins
   on or after October 15, 1997, the licensee will be required to prepare an
   Environmental Assessment if construction or modification of the facility
   would not comply with the provisions of paragraph (b)(1) of this section.
   These transition provisions do not apply to applications for equipment
   authorization  or  use  for mobile, portable and unlicensed devices as
   specified in paragraph (b)(2) of this section.

   (i) For facilities and operations licensed or authorized under parts 5, 21
   (subpart K), 25, 73, 74 (subparts A, G, I, and L), and 80 of this chapter,
   the “Radio Frequency Protection Guides” recommended in “American National
   Standard Safety Levels with Respect to Human Exposure to Radio Frequency
   Electromagnetic Fields, 300 kHz to 100 GHz”, (ANSI C95.1–1982), issued by
   the American National Standards Institute (ANSI) and copyright 1982 by the
   Institute of Electrical and Electronics Engineers, Inc., New York, New York
   shall apply. With respect to subpart K of part 21 and subpart I of part 74
   of this chapter, these requirements apply only to multipoint distribution
   service and instructional television fixed service stations transmitting
   with an equivalent isotropically radiated power (EIRP) in excess of 200
   watts.  With  respect  to  subpart L of part 74 of this chapter, these
   requirements apply only to FM booster and translator stations transmitting
   with an effective radiated power (ERP) in excess of 100 watts. With respect
   to part 80 of this chapter, these requirements apply only to ship earth
   stations.

   (ii) For facilities and operations licensed or authorized under part 24 of
   this chapter, licensees and manufacturers are required to ensure that their
   facilities and equipment comply with IEEE C95.1–1991 (ANSI/IEEE C95.1–1992),
   “Safety  Levels  With  Respect  to  Human  Exposure to Radio Frequency
   Electromagnetic Fields, 3 kHz to 300 GHz.” Measurement methods are specified
   in IEEE C95.3–1991, “Recommended Practice for the Measurement of Potentially
   Hazardous  Electromagnetic  Fields—RF  and Microwave.” Copies of these
   standards are available from IEEE Standards Board, 445 Hoes Lane, P.O. Box
   1331, Piscataway, NJ 08855–1331. Telephone: 1–800–678–4333. The limits for
   both  “controlled” and “uncontrolled” environments, as defined by IEEE
   C95.1–1991, will apply to all PCS base and mobile stations, as appropriate.

   (iii) Applications for all other types of facilities and operations are
   categorically  excluded from routine RF radiation evaluation except as
   provided in paragraphs (c) and (d) of this section.

   (5) Existing transmitting facilities, devices and operations: All existing
   transmitting facilities, operations and devices regulated by the Commission
   must be in compliance with the requirements of paragraphs (b)(1) through
   (b)(3) of this section by September 1, 2000, or, if not in compliance, file
   an Environmental Assessment as specified in  Sec. 1.1311.

   (c) If an interested person alleges that a particular action, otherwise
   categorically excluded, will have a significant environmental effect, the
   person shall submit to the Bureau responsible for processing that action a
   written  petition  setting  forth  in detail the reasons justifying or
   circumstances   necessitating   environmental   consideration  in  the
   decision-making  process.  ( See  Sec. 1.1313). The Bureau shall review the
   petition and consider the environmental concerns that have been raised. If
   the Bureau determines that the action may have a significant environmental
   impact,  the  Bureau will require the applicant to prepare an EA ( see
    Sec.  Sec. 1.1308 and 1.1311), which will serve as the basis for the determination to
   proceed with or terminate environmental processing.

   (d) If the Bureau responsible for processing a particular action, otherwise
   categorically excluded, determines that the proposal may have a significant
   environmental impact, the Bureau, on its own motion, shall require the
   applicant to submit an EA. The Bureau will review and consider the EA as in
   paragraph (c) of this section.

   (e) No State or local government or instrumentality thereof may regulate the
   placement, construction, and modification of personal wireless service
   facilities on the basis of the environmental effects of radio frequency
   emissions to the extent that such facilities comply with the regulations
   contained in this chapter concerning the environmental effects of such
   emissions. For purposes of this paragraph:

   (1) The term personal wireless service means commercial mobile services,
   unlicensed wireless services, and common carrier wireless exchange access
   services;

   (2) The term personal wireless service facilities means facilities for the
   provision of personal wireless services;

   (3)  The  term  unlicensed  wireless  services  means  the offering of
   telecommunications services using duly authorized devices which do not
   require  individual  licenses,  but  does  not  mean  the provision of
   direct-to-home satellite services; and

   (4) The term direct-to-home satellite services means the distribution or
   broadcasting  of  programming or services by satellite directly to the
   subscriber's premises without the use of ground receiving or distribution
   equipment, except at the subscriber's premises or in the uplink process to
   the satellite.

   [ 51 FR 15000 , Apr. 22, 1986]

   Editorial Note:   ForFederal Registercitations affecting  Sec. 1.1307, see the
   List of CFR Sections Affected, which appears in the Finding Aids section of
   the printed volume and on GPO Access.


Goto Section: 1.1306 | 1.1308

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public