Goto Section: 80.79 | 80.81 | Table of Contents

FCC 80.80
Revised as of October 2, 2015
Goto Year:2014 | 2016
  § 80.80   Operating controls for ship stations.

   (a) Each control point must be capable of:

   (1) Starting and discontinuing operation of the station;

   (2) Changing frequencies within the same sub-band;

   (3) Changing from transmission to reception and vice versa.

   (4) In the case of stations operating in the 156-162 MHz bands, reducing
   power output to one watt or less in accordance with § 80.215(e).1

   1Ship  station  transmitters,  except hand-held portable transmitters,
   manufactured after January 21, 1987 must automatically reduce the carrier
   power  to one watt or less when turned to the frequency 156.375 MHz or
   156.650  MHz. All ship station tramsmitters, except hand-held portable
   transmitters, used after January 21, 1997, must automatically reduce power
   as described above. A manual override device must be provided which when
   held by the operator will permit full carrier power operation on channels 13
   and 67. Hand-held portable transmitters must be capable of reducing power to
   one watt, but need not do so automatically.

   (b) Each ship station using telegraphy must be capable of changing from
   telegraph transmission to telegraph reception and vice versa without manual
   switching.

   (c) Each ship station using telephony must be capable of changing from
   transmission to reception and vice versa within two seconds excluding a
   change in operating radio channel.

   (d) During its hours of service, each ship station must be capable of:

   (1) Commencing operation within one minute;

   (2) Discontinuing all emission within five seconds after emission is no
   longer desired.

   (e) Each ship station using a multi-channel installation for telegraphy
   (except equipment intended for use only in emergencies on frequencies below
   515 kHz) must be capable of changing from one radio channel to another
   within:

   (1) Five seconds if the channels are within the same sub-band; or

   (2) Fifteen seconds if the channels are not within the same sub-band.

   (f) Each ship station and marine-utility station using a multi-channel
   installation  for telephony must be capable of changing from one radio
   channel to another within:

   (1) Five seconds within the band 1605-3500 kHz; or

   (2) Three seconds within the band 156-162 MHz.

   (g)(1) Any telegraphy transmitter constructed since January 1, 1952, that
   operates in the band 405-525 kHz with an output power in excess of 250 watts
   must be capable of reducing the output power to 150 watts or less.

   (2) The requirement of paragraph (g)(1) of this section does not apply when
   there is available in the same station a transmitter capable of operation on
   the  international  calling frequency 500 kHz and at least one working
   frequency within the band 405-525 kHz, capable of being energized by a
   source of power other than an emergency power source and not capable of an
   output in excess of 100 watts when operated on such frequencies.

   [ 51 FR 31213 , Sept. 2, 1986, as amended at  52 FR 35244 , Sept. 18, 1987]

   return arrow Back to Top


Goto Section: 80.79 | 80.81

Goto Year: 2014 | 2016
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public