FCC 76.1804 Revised as of October 1, 2005
Goto Year:2004 |
2006
Sec. 76.1804 Aeronautical frequencies: leakage monitoring (CLI).
An MVPD shall notify the Commission before transmitting any carrier or other
signal component with an average power level across a 25 kHz bandwidth in
any 160 microsecond time period equal to or greater than 10^−4 watts at any
point in the cable distribution system on any new frequency or frequencies
in the aeronautical radio frequency bands (108–137 and 225–400 MHz). The
notification shall be made on FCC Form 321. Such notification shall include:
(a) Legal name and local address of the MVPD;
(b) The names and FCC identifiers (e.g., CA0001) of the system communities
affected, for a cable system, and the name and FCC identifier (e.g.,
CAB901), for other MVPDs;
(c) The names and telephone numbers of local system officials who are
responsible for compliance with Sec. Sec. 76.610 through 76.616 and Sec. 76.1803;
(d) Carrier frequency, tolerance, and type of modulation of all carriers in
the aeronautical bands at any location in the cable distribution system and
the maximum of those average powers measured over a 2.5 kHz bandwidth as
described in the introductory paragraph to this rule section;
(e) The geographical coordinates (in NAD83) of a point near the center of
the system, together with the distance (in kilometers) from the designated
point to the most remote point of the plant, existing or planned, that
defines a circle enclosing the entire plant;
(f) Certification that the monitoring procedure used is in compliance with
Sec. 76.614 or description of the routine monitoring procedure to be used; and
(g) For MVPDs subject to Sec. 76.611, the cumulative signal leakage index
derived under Sec. 76.611(a)(1) or the results of airspace measurements derived
under Sec. 76.611(a)(2), including a description of the method by which
compliance with the basic signal leakage criteria is achieved and the method
of calibrating the measurement equipment.
(h) Aeronautical Frequency Notifications, FCC Form 321, shall be personally
signed either electronically or manually by the operator; by one of the
partners, if the operator is a partnership; by an officer, if the operator
is a corporation; by a member who is an officer, if the operator is an
unincorporated association; or by any duly authorized employee of the
operator.
(i) Aeronautical Frequency Notifications, FCC Form 321, may be signed by the
operator's attorney in case of the operator's physical disability or of his
absence from the United States. The attorney shall in that event separately
set forth the reasons why the FCC Form 321 was not signed by the operator.
In addition, if any matter is stated on the basis of the attorney's belief
only (rather than the attorney's knowledge), the attorney shall separately
set forth the reasons for believing that such statements are true.
(j) The FCC Registration Number (FRN).
[ 68 FR 27003 , May 19, 2003]
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.