Goto Section: 21.371 | 21.377

FCC 21.373
Revised as of May 5, 2005
Goto Year:2004 | 2006
Sec.  22.373   Access to transmitters.

   

   Link to an amendment published at  70 FR 19309 , Apr. 13, 2005.

   Unless otherwise provided in this part, the design and installation of
   transmitters in the Public Mobile Services must meet the requirements
   of this section.

   (a) Transmitters and control points, other than those used with
   in-building radiation systems, must be installed such that they are
   readily accessible only to persons authorized by the licensee to
   operate or service them.

   (b) Transmitters must be designed and installed such that any
   adjustments or controls that could cause the transmitter to deviate
   from its authorized operating parameters are readily accessible only
   to persons authorized by the licensee to make such adjustments.

   (c) Transmitters (other than hand-carried or pack-carried mobile
   transmitters) and control points must be equipped with a means of
   indicating when the control circuitry has been put in a condition that
   should cause the transmitter to radiate.

   (d) Transmitters must be designed such that they can be turned off
   independently of any remote control circuits.

   (e) Transmitters used with in-building radiation systems must be
   installed such that, to the extent possible, they are readily
   accessible only to persons authorized by the licensee to access them.

   (f) Transmitters used with in-building radiation systems must be
   designed such that, in the event an unauthorized person does gain
   access, that person can not cause the transmitter to deviate from its
   authorized operating parameters in such a way as to cause interference
   to other stations.


Goto Section: 21.371 | 21.377

Goto Year: 2004 | 2006
CiteFind - See documents on FCC website that cite this rule

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.