Sec.  2.1060   Equipment for use in the amateur radio service.

   (a) The general provisions of  Sec.  Sec. 2.925, 2.1031, 2.1033, 2.1041, 2.1043,
   2.1051, 2.1053 and 2.1057 shall apply to applications for, and grants of,
   certification for equipment operated under the requirements of part 97 of
   this chapter, the Amateur Radio Service.

   (b) When performing the tests specified in  Sec.  Sec. 2.1051 and 2.1053 of this part,
   the center of the transmitted bandwidth shall be within the operating
   frequency band by an amount equal to 50 percent of the bandwidth utilized
   for the tests. In addition, said tests shall be made on at least one
   frequency in each of the bands within which the equipment is capable of
   tuning.

   (c) Any supplier of an external radio frequency power amplifier kit as
   defined by  Sec. 97.3(a)(17) of this chapter shall comply with the following
   requirements:

   (1) Assembly of one unit of a specific type shall be made in exact
   accordance with the instructions being supplied with the product being
   marketed. If all of the necessary components are not normally furnished with
   the kit, assembly shall be made using the recommended components.

   (2) The measurement data required for certification shall be obtained for
   this unit and submitted with the certification application. Unless otherwise
   requested, it is not necessary to submit this unit with the application.

   (3) A copy of the exact instructions which will be provided for assembly of
   the equipment shall be provided in addition to other material required by
    Sec. 2.1033 of this part.

   (4) The identification label required by  Sec. 2.925 of this part shall be
   permanently affixed to the assembled unit and shall be of sufficient size so
   as to be easily read. The following information shall be shown on the label:

   (Name of Grantee of Certification)

   FCC ID: (The number assigned to the equipment by the grantor)

   This amplifier can be expected to comply with part 97 of the FCC Regulations
   when assembled and aligned in strict accordance with the instruction manual
   using components with the kit or an exact equivalent thereof.

   (Title and signature of responsible representative of Grantee)

   Statement of Compliance

   I state that I have constructed this equipment in accordance with the
   instruction manual and using the parts furnished by the supplier of this
   kit.

   (Signature) ________________________________

   (Date)

   (Amateur call sign) (Class of license)

   (Expiration date of license)

   (To be signed by the person responsible for proper assembly of kit.)

   (5) If requested, an unassembled unit shall be provided for assembly and
   test by the Commission. Shipping charges to and from the Commission's
   Laboratory shall be borne by the applicant.

   (d) Certification of external radio frequency power amplifiers and amplifier
   kits may be denied when denial serves the public interest, convenience and
   necessity by preventing the use of these amplifiers in services other than
   the Amateur Radio Service. Other uses of these amplifiers, such as in the
   Citizens Band Radio Service, are prohibited ( Sec. 95.411 of this chapter).
   Examples of features which may result in the denial of certification are
   contained in  Sec. 97.317 of this chapter.

   [ 63 FR 36601 , July 7, 1998]

Declaration of Conformity