Goto Section: 17.35 | 17.38

FCC 17.37
Revised as of June 29, 2005
Goto Year:2004 | 2006
Sec.  15.37   Transition provisions for compliance with the rules.

   

   Equipment may be authorized, manufactured and imported under the rules
   in effect prior to June 23, 1989, in accordance with the following
   schedules:

   (a) For all intentional and unintentional radiators, except for
   receivers: Radio frequency equipment verified by the responsible party
   or for which an application for a grant of equipment authorization is
   submitted to the Commission on or after June 23, 1992, shall comply
   with the regulations specified in this part. Radio frequency equipment
   that is manufactured or imported on or after June 23, 1994, shall
   comply with the regulations specified in this part.

   (b) For receivers: Receivers subject to the regulations in this part
   that are manufactured or imported on or after June 23, 1999, shall
   comply with the regulations specified in this part. However, if a
   receiver is associated with a transmitter that could not have been
   authorized under the regulations in effect prior to June 23, 1989,
   e.g., a transmitter operating under the provisions of Sec. 15.209 or
   Sec. 15.249 (below 960 MHz), the transition provisions in this section do
   not apply. Such receivers must comply with the regulations in this
   part. In addition, receivers are subject to the provisions in
   paragraph (f) of this section.

   (c) There are no restrictions on the operation or marketing of
   equipment complying with the regulations in effect prior to June 23,
   1989.

   (d) Prior to May 25, 1991, person shall import, market or operate
   intentional radiators within the band 902-905 MHz under the provisions
   of Sec. 15.249. Until that date, the Commission will not issue a grant of
   equipment authorization for equipment operating under Sec. 15.249 if the
   equipment is designed to permit operation within the band 902-905 MHz.

   (e) For cordless telephones: The manufacture and importation of
   cordless telephones not complying with Sec. 15.214(d) of this part shall
   cease on or before September 11, 1991. These provisions will not apply
   to cordless telephones which are repaired or refurbished, or
   re-imported after repair or refurbishment. Applications for a grant of
   equipment authorization of cordless telephones not complying with
   Sec. 15.214(d) of this part will not be accepted by the Commission after
   May 10, 1991. Cordless telephones that have previously received
   equipment authorization and that, without modification, already comply
   with the requirements of Sec. 15.214(d) of this part, need not be
   reauthorized.

   (f) The manufacture or importation of scanning receivers, and
   frequency converters designed or marketed for use with scanning
   receivers, that do not comply with the provisions of Sec. 15.121(a)(1)
   shall cease on or before April 26, 1994. Effective April 26, 1993, the
   Commission will not grant equipment authorization for receivers that
   do not comply with the provisions of Sec. 15.121(a)(1). These rules do not
   prohibit the sale or use of authorized receivers manufactured in the
   United States, or imported into the United States, prior to April 26,
   1994.

   (g) For CPU boards and power supplies designed to be used with
   personal computers: The manufacture and importation of these products
   shall cease on or before June 19, 1997 unless these products have been
   authorized under a Declaration of Conformity or a grant of
   certification, demonstrating compliance with all of the provisions in
   this part. Limited provisions, as detailed in Sec. 15.101(d), are provided
   to permit the importation and manufacture of these products subsequent
   to this date where the CPU boards and/or power supplies are marketed
   only to personal computer equipment manufacturers.

   (h) The manufacture or importation of scanning receivers, and
   frequency converters designed or marketed for use with scanning
   receivers, that do not comply with the provisions of Sec. 15.121 shall
   cease on or before October 25, 1999. Effective July 26, 1999 the
   Commission will not grant equipment authorization for receivers that
   do not comply with the provisions of Sec. 15.121. This paragraph does not
   prohibit the sale or use of authorized receivers manufactured in the
   United States, or imported into the United States, prior to October
   25, 1999.

   (i) Effective October 16, 2002, an equipment approval may no longer be
   obtained for medical telemetry equipment operating under the
   provisions of Sec. 15.241 or Sec. 15.242. The requirements for obtaining an
   approval for medical telemetry equipment after this date are found in
   Subpart H of Part 95 of this chapter.

   (j) All radio frequency devices that are authorized under the
   certification, verification or declaration of conformity procedures on
   or after July 12, 2004 shall comply with the conducted limits
   specified in Sec. 15.107 or Sec. 15.207 as appropriate. All radio frequency
   devices that are manufactured or imported on or after July 11, 2005
   shall comply with the conducted limits specified in Sec. 15.107 or
   Sec. 15.207, as appropriate. Equipment authorized, imported or
   manufactured prior to these dates shall comply with the conducted
   limits specified in Sec. 15.107 or Sec. 15.207, as appropriate, or with the
   conducted limits that were in effect immediately prior to September 9,
   2002.

   (k) Radar detectors manufactured or imported after August 28, 2002 and
   marketed after September 27, 2002 shall comply with the regulations
   specified in this part. Radar detectors manufactured or imported prior
   to January 27, 2003 may be labeled with the information required by
   Sec. Sec. 2.925 and 15.19(a) of this chapter on the individual equipment
   carton rather than on the device, and are exempt from complying with
   the requirements of Sec. 15.21.

   (l) U-NII equipment operating in the 5.25-5.35 GHz band for which
   applications for certification are filed on or after January 20, 2006
   shall comply with the DFS and TPC requirements specified in Sec. 15.407.
   U-NII equipment operating in the 5.25-5.35 GHz band that are imported
   or marketed on or after January 20, 2007 shall comply with the DFS and
   TPC requirements in Sec. 15.407.

   (m) All Access BPL devices that are manufactured, imported, marketed
   or installed on or after July 7, 2006, shall comply with the
   requirements specified in subpart G of this part, including
   certification of the equipment.

   [ 54 FR 17714 , Apr. 25, 1989;  54 FR 32339 , Aug. 7, 1989;  55 FR 25095 ,
   June 20, 1990;  56 FR 3785 , Jan. 31, 1991;  58 FR 25575 , Apr. 27, 1993;
    61 FR 31049 , June 19, 1996;  64 FR 22561 , Apr. 27, 1999;  65 FR 44008 ,
   July 17, 2000;  67 FR 45670 , July 10, 2002;  67 FR 48993 , July 29, 2002;
    69 FR 2686 , Jan. 20, 2004;  70 FR 1373 , Jan. 7, 2005;  70 FR 17329 , Apr.
   6, 2005]


Goto Section: 17.35 | 17.38

Goto Year: 2004 | 2006
CiteFind - See documents on FCC website that cite this rule

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public