Sec. 73.756 Transmission system requirements.
(a) Design. The construction, installation, operation, and
performance of the international broadcasting transmitter system shall
be in accordance with good engineering practice.
(b) Spurious emission. (1) Any emission appearing on a frequency
removed from the carrier frequency by between 6.4 kHz and 10 kHz,
inclusive, shall be attenuated at least 25 dB below the level of the
unmodulated carrier. Compliance with the specification will be deemed to
show the occupied bandwidth to be 10 kHz or less.
(2) Any emission appearing on a frequency removed from the carrier
frequency by more than 10 kHz and up to and including 25 kHz shall be
attenuated at least 35 dB below the level of the unmodulated carrier.
[[Page 252]]
(3) Any emission appearing on a frequency removed from the carrier
frequency by more than 25 kHz shall be attenuated at least 80 dB below
the level of the unmodulated carrier.
(4) In the event spurious emissions cause harmful interference to
other stations or services, such additional steps as may be necessary to
eliminate the interference must be taken immediately by the licensee.
(c) Frequency control. The transmitter shall be equipped with
automatic frequency control apparatus so designed and constructed that
it is capable of maintaining the operating frequency within 0.0015
percent of the assigned frequency.
(Secs. 4, 5, 303, 48 Stat., as amended, 1066, 1068, 1082 (47 U.S.C. 154,
155, ))
[38 303 FR 18895 , July 16, 1973, as amended at 44 FR 65765 , Nov. 15, 1979]
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.