Goto Section: 24.132 | 24.134 | Table of Contents
FCC 24.133
Revised as of
Goto Year:1996 |
1998
Sec. 24.133 Emission limits.
(a) The power of any emission shall be attenuated below the
transmitter power (P), as measured in accordance with Sec. 99.132(f), in
accordance with the following schedule:
(1) For transmitters authorized a bandwidth greater than 10 kHz:
(i) On any frequency outside the authorized bandwidth and removed
from the edge of the authorized bandwidth by a displacement frequency
(fd in kHz) of up to and including 40 kHz: at least 116
Log10 ((fd+10)/6.1) decibels or 50 plus 10
Log10 (P) decibels or 70 decibels, whichever is the lesser
attenuation;
(ii) On any frequency outside the authorized bandwidth and removed
from the edge of the authorized bandwidth by a displacement frequency
(fd in kHz) of more than 40 kHz: at least 43+10
Log10 (P) decibels or 80 decibels, whichever is the lesser
attenuation.
(2) For transmitters authorized a bandwidth of 10 kHz:
(i) On any frequency outside the authorized bandwidth and removed
from the edge of the authorized bandwidth by a displacement frequency
(fd in kHz) of up to and including 20 kHz: at least 116 x
Log10 ((fd+5)/3.05) decibels or
50+10 x Log10 (P) decibels or 70 decibels, whichever is the
lesser attenuation;
(ii) On any frequency outside the authorized bandwidth and removed
from the edge of the authorized bandwidth by a displacement frequency
(fd in kHz) of more than 20 kHz: at least 43+10 Log
10 (P) decibels or 80 decibels, whichever is the lesser
attenuation.
(b) The measurements of emission power can be expressed in peak or
average values provided they are expressed in the same parameters as the
transmitter power.
(c) When an emission outside of the authorized bandwidth causes
harmful interference, the Commission may, at its discretion, require
greater attenuation than specified in this section.
(d) The following minimum spectrum analyzer resolution bandwidth
settings will be used: 300 Hz when showing compliance with paragraphs
(a)(1)(i) and (a)(2)(i) of this section; and 30 kHz when showing
compliance with paragraphs (a)(1)(ii) and (a)(2)(ii) of this section.
[ 58 FR 59183 , Nov. 8, 1993. Redesignated at 59 FR 18499 , April 9, 1994,
as amended at 59 FR 14119 , Mar. 25, 1994]
Goto Section: 24.132 | 24.134
Goto Year: 1996 |
1998
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public