FCC Web Documents citing 80.481

as compiled by hallikainen.com/FccRules on 2012 07 01

• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-1513A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-1513A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-1513A1.txt
  • kHz AMTSA 10 B 217.0 - 217.5 / 219.0 - 219.5 1 MHz 2 x 500 kHz AMTSA 10 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. § 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. § 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. § 80.211 if the licensee were using 25 kHz channels. Rules and Disclaimers Relevant Authority Prospective applicants must familiarize themselves
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-954A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-954A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-04-954A1.txt
  • kHz AMTSA 10 B 217.0 - 217.5 / 219.0 - 219.5 1 MHz 2 x 500 kHz AMTSA 10 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. § 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. § 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. § 80.211 if the licensee were using 25 kHz channels. The Balanced Budget Act of 1997 requires the Commission to
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1047A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1047A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1047A1.txt
  • kHz AMTSA 9 B 217.0 - 217.5 / 219.0 - 219.5 1 MHz 2 x 500 kHz AMTSA 1 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. § 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. § 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. § 80.211 if the licensee were using 25 kHz channels. Rules and Disclaimers Relevant Authority Prospective applicants must familiarize themselves
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-194A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-194A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-194A1.txt
  • kHz AMTSA 9 B 217.0 - 217.5 / 219.0 - 219.5 1 MHz 2 x 500 kHz AMTSA 1 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. § 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. § 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. § 80.211 if the licensee were using 25 kHz channels. For Auction No. 61, licenses are not available in each
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-1333A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-1333A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-1333A1.txt
  • or channelization scheme, as long as that scheme complies with Section 80.211 at the band edges. Legal Basis: 47 U.S.C. 154, 303, 307(e), 309, and 332; 47 U.S.C. 151-155, 301-609; 3 U.S.T. 3450, 3 U.S.T. 4726 and 12 U.S.T. 2377. Section Number and Title: 80.475(b) Scope of service of the Automated Maritime Telecommunications System (AMTS). 80.477(d) AMTS points of communication. 80.481 Alternative technical parameters for AMTS transmitters. PART 90-PRIVATE LAND MOBILE RADIO SERVICES SUBPART B-PUBLIC SAFETY RADIO POOL Brief Description: These rules contain limitations on the assignment of channels in the Public Safety Radio Pool. Need: In implementing the goal of efficient spectrum use, these rules list technical and geographic limitations applicable to each frequency in the Public Safety Radio Pool.
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-00-370A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-00-370A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-00-370A1.txt
  • amended by adding new subsection (d) to read as follows: § 80.477 AMTS points of communication. * * * * * . (d) AMTS licensees may use AMTS coast and ship frequencies on a secondary basis for fixed service communications to support AMTS deployment in remote fixed locations at which other communications facilities are not available. 12. A new Section 80.481 is added to read as follows: § 80.481 Alternative technical parameters for AMTS transmitters. In lieu of the technical parameters set forth in this part, AMTS transmitters may utilize any modulation or channelization scheme so long as emissions are attenuated, in accordance with § 80.211 of this chapter, at the band edges of each station's assigned channel group or groups.
• http://wireless.fcc.gov/auctions/20/releases/f970217a.pdf http://wireless.fcc.gov/auctions/20/releases/f970217a.txt http://wireless.fcc.gov/auctions/20/releases/f970217a.wp
  • may either distribute the available frequencies upon mutual agreement or request that the Commission assign frequencies along the common border. Operation along international borders is subject to coordination with foreign administrations. * * * * * 9. Section 80.374 is amended by deleting paragraph (a) and redesignating paragraphs (b) and (c) as (a) and (b) respectively. 10. A new Section 80.481 is added to read as follows: § 80.481 Alternative technical parameters for AMTS transmitters. In lieu of the technical parameters set forth in this part, AMTS transmitters may utilize any modulation or channelization scheme so long as emissions are attenuated, in accordance with 47 C.F.R. § 80.211, at the band edges of each station's assigned channel group or groups.
• http://wireless.fcc.gov/auctions/57/resources/S_Stone.pdf
  • River, see see55ththReport and Order at n.203] Report and Order at n.203] Section 80.60: Partitioning (dividing geographic areas) and dis Section 80.60: Partitioning (dividing geographic areas) and disaggregation aggregation (dividing spectrum) are permitted. (dividing spectrum) are permitted. Technical Rules Technical Rules Part 80 Subpart E sets forth general technical standards. Part 80 Subpart E sets forth general technical standards. Section 80.481: The 25 Section 80.481: The 25--kHz band plan in Section 80.385(a)(2) is optional. kHz band plan in Section 80.385(a)(2) is optional. However, regardless of the However, regardless of the channelization channelizationscheme used, emissions at the scheme used, emissions at the band edges must be attenuated within the limitation that would b band edges must be attenuated within the limitation that
• http://wireless.fcc.gov/auctions/61/resources/03_JTobias_JShaffer.pdf
  • River, see see55ththReport and Order at n.203] Report and Order at n.203] Section 80.60: Partitioning (dividing geographic areas) and dis Section 80.60: Partitioning (dividing geographic areas) and disaggregation aggregation (dividing spectrum) are permitted. (dividing spectrum) are permitted. Technical Rules Technical Rules Part 80 Subpart E sets forth general technical standards. Part 80 Subpart E sets forth general technical standards. Section 80.481: The 25 Section 80.481: The 25--kHz band plan in Section 80.385(a)(2) is optional. kHz band plan in Section 80.385(a)(2) is optional. However, regardless of the However, regardless of the channelization channelizationscheme used, emissions at the scheme used, emissions at the band edges must be attenuated within the limitation that would b band edges must be attenuated within the limitation that
• http://wireless.fcc.gov/auctions/data/bandplans/AMTS_band_plan.pdf
  • A 217.5 ­218.0 / 219.5 ­220.0 1 MHz B 217.0 ­217.5 / 219.0 ­219.5 1 MHz Coast Transmit Ship Transmit Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. § 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. §80.481, licensees are not required to use 25 kHz channelizationand may choose any channelizationscheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. § 80.211 if the licensee were using 25 kHz channels.
• http://wireless.fcc.gov/auctions/default.htm?job=auction_factsheet&id=57
  • kHz AMTSA 10 B 217.0 - 217.5 / 219.0 - 219.5 1 MHz 2 x 500 kHz AMTSA 10 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. section 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. section 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. section 80.211 if the licensee were using 25 kHz channels. Permissible Operations AMTS is a specialized system of coast stations
• http://wireless.fcc.gov/auctions/default.htm?job=auction_factsheet&id=61
  • MHz 2 x 500 kHz AMTSA 9 B 217.0 217.5 / 219.0 219.5 1 MHz 2 x 500 kHz AMTSA 1 Note: The above table displays the band edges of spectrum blocks A and B using the twenty 25 kHz channels that comprise each block as listed in 47 C.F.R. 80.385(a)(2). It should be noted that pursuant to 47 C.F.R. 80.481, licensees are not required to use 25 kHz channelization and may choose any channelization scheme; however, regardless of the channelization scheme used, emissions at these band edges must be attenuated within the limitation that would be required under 47 C.F.R. 80.211 if the licensee were using 25 kHz channels. For Auction No. 61, licenses are not available in each spectrum