Goto Section: 95.577 | 95.587 | Table of Contents
FCC 95.579
Revised as of October 1, 2018
Goto Year:2017 |
2019
§ 95.579 FRS unwanted emissions limits.
Each FRS transmitter type must be designed to satisfy the applicable
unwanted emissions limits in this paragraph.
(a) Attenuation requirements. The power of unwanted emissions must be
attenuated below the carrier power output in Watts (P) by at least:
(1) 25 dB (decibels) in the frequency band 6.25 kHz to 12.5 kHz removed
from the channel center frequency.
(2) 35 dB in the frequency band 12.5 kHz to 31.25 kHz removed from the
channel center frequency.
(3) 43 + 10 log (P) dB in any frequency band removed from the channel
center frequency by more than 31.25 kHz.
(b) Measurement bandwidths. The power of unwanted emissions in the
frequency bands specified in paragraphs (a)(1) and (2) of this section
is measured with a reference bandwidth of 300 Hz. The power of unwanted
emissions in the frequency range specified in paragraph (a)(3) is
measured with a reference bandwidth of at least 30 kHz.
(c) Measurement conditions. The requirements in this section apply to
each FRS transmitter type both with and without the connection of
permitted attachments, such as an external speaker, microphone and/or
power cord.
return arrow Back to Top
Goto Section: 95.577 | 95.587
Goto Year: 2017 |
2019
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public