Goto Section: 22.527 | 22.531 | Table of Contents
FCC 22.529
Revised as of October 1, 2018
Goto Year:2017 |
2019
§ 22.529 Application requirements for the Paging and Radiotelephone Service.
In addition to information required by subparts B and D of this part,
applications for authorization in the Paging and Radiotelephone Service
contain required information as described in the instructions to the
form. Site coordinates must be referenced to NAD83 and be correct to +
−1 second.
(a) Administrative information. The following information, associated
with Form 601, is required as indicated. Each application of any type,
including applications for paging geographic area authorizations, must
contain one and only one Schedule A.
(1) The purpose of the filing is required for each application of any
type.
(2) The geographic area designator, channel and geographic area name
are required only for each application for a paging geographic area
authorization.
(3) The FCC control point number, if any, the location (street address,
city or town, state), the telephone number and an indication of the
desired database action are required only for each application
proposing to add or delete a control point.
(4) The FCC location number, file number and location (street address,
city or town, state) of authorized facilities that have not been
constructed are required only for each application requesting an
extension of time to construct those facilities.
(b) Technical data. The following data, associated with FCC Form 601,
are required as indicated for each application. Applications for a
paging geographic area authorization must not contain Schedule B. Other
type of applications may contain as many Schedule Bs as are necessary
for the intended purpose.
(1) For each transmitting antenna site to be added, deleted or
modified, the following are required: an indication of the desired
database action, the Commission location number, if any, the street
address or other description of the transmitting antenna site, the
city, county and state, the geographic coordinates (latitude and
longitude), correct to ±1 second, of the transmitting antenna site
(NAD83), and in the case of a proposed relocation of a transmitting
antenna, the Commission location number and geographic coordinates,
correct to ±1 second, of the transmitting antenna site (NAD83) to which
the geographic coordinates of the current location are referenced.
(2) For each transmitting antenna site to be added, deleted or
modified, the following supplementary information is required: An
indication as to whether or not the transmitting antenna site is within
200 kilometers (124 miles) of the U.S.-Mexico border, and an indication
as to whether or not the transmitting antenna site is North of Line A
or East of Line C. Line A and Line C are defined in § 2.1 of this
chapter. For each adjacent geographic area within 200 kilometers (124
miles) of each transmitting antenna site to be added, deleted or
modified, the geographic area designator and name, and the shortest
distance (in kilometers) to the boundary of that geographic area.
(3) The height (in meters) above average terrain of the center of
radiation of the antenna, the beamwidth of the main lobe of the
horizontal radiation pattern of the electric field of the antenna, the
height (in meters) to the tip of the antenna above ground level, a
polar plot of the horizontal gain pattern of the antenna, the antenna
gain in the maximum lobe and the electric field polarization of the
wave emitted by the antenna when installed as proposed.
(i) The center frequency of the requested channel, the transmitter
classification (e.g. base, fixed mobile), the designator for any
non-standard emission type to be used, including bandwidth and
modulation type, and the maximum effective radiated power.
(ii) For each of the eight cardinal radials, the antenna height above
the average elevation along the radial, and the effective radiated
power of each transmitter in the direction of the radial.
(iii) For each transmitter proposed to transmit on a channel reserved
for point-to-multipoint operation involving transmission to four or
more points of communications (i.e. base transmitters), the following
is required for each point of communication: an indication of the
desired database action, the location (city or town, state), and the
geographical coordinates (latitude and longitude, NAD 83).
(c) Upon request by an applicant, licensee, or the Commission, a part
22 applicant or licensee of whom the request is made shall furnish the
antenna type, model, and the name of the antenna manufacturer to the
requesting party within ten (10) days of receiving written
notification.
[ 62 FR 11635 , Mar. 12, 1997, as amended at 63 FR 68945 , Dec. 14, 1998;
64 FR 53240 , Oct. 1, 1999]
return arrow Back to Top
Paging Operation
return arrow Back to Top
Goto Section: 22.527 | 22.531
Goto Year: 2017 |
2019
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public