Goto Section: 73.14 | 73.23 | Table of Contents
FCC 73.21
Revised as of October 5, 2017
Goto Year:2016 |
2018
§ 73.21 Classes of AM broadcast channels and stations.
(a) Clear channel. A clear channel is one on which stations are
assigned to serve wide areas. These stations are protected from
objectionable interference within their primary service areas and,
depending on the class of station, their secondary service areas.
Stations operating on these channels are classified as follows:
(1) Class A station. A Class A station is an unlimited time station
that operates on a clear channel and is designed to render primary and
secondary service over an extended area and at relatively long
distances from its transmitter. Its primary service area is protected
from objectionable interference from other stations on the same and
adjacent channels, and its secondary service area is protected from
interference from other stations on the same channel. (See § 73.182).
The operating power shall not be less than 10 kW nor more than 50 kW.
(Also see § 73.25(a)).
(2) Class B station. Class B stations are authorized to operate with a
minimum power of 0.25 kW (or, if less than 0.25 kW, an equivalent RMS
antenna field of at least 107.5 mV/m at 1 kilometer) and a maximum
power of 50 kW, or 10 kW for stations that are authorized to operate in
the 1605-1705 kHz band.
(3) Class D station. A Class D station operates either daytime, limited
time or unlimited time with nighttime power less than 0.25 kW and an
equivalent RMS antenna field of less than 107.5 mV/m at 1 kilometer.
Class D stations shall operate with daytime powers not less than 0.25
kW nor more than 50 kW. Nighttime operations of Class D stations are
not afforded protection and must protect all Class A and Class B
operations during nighttime hours. New Class D stations that had not
been previously licensed as Class B will not be authorized.
(b) Regional Channel. A regional channel is one on which Class B and
Class D stations may operate and serve primarily a principal center of
population and the rural area contiguous thereto.
Note: Until the North American Regional Broadcasting Agreement (NARBA)
is terminated with respect to the Bahama Islands and the Dominican
Republic, radiation toward those countries from a Class B station may
not exceed the level that would be produced by an omnidirectional
antenna with a transmitted power of 5 kW, or such lower level as will
comply with NARBA requirements for protection of stations in the Bahama
Islands and the Dominican Republic against objectionable interference.
(c) Local channel. A local channel is one on which stations operate
unlimited time and serve primarily a community and the suburban and
rural areas immediately contiguous thereto.
(1) Class C station. A Class C station is a station operating on a
local channel and is designed to render service only over a primary
service area that may be reduced as a consequence of interference in
accordance with § 73.182. The power shall not be less than 0.25 kW, nor
more than 1 kW. Class C stations that are licensed to operate with 0.1
kW may continue to do so.
[ 56 FR 64856 , Dec. 12, 1991, as amended at 81 FR 2759 , Jan. 19, 2016]
return arrow Back to Top
Goto Section: 73.14 | 73.23
Goto Year: 2016 |
2018
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public