§ 20.19   Hearing aid-compatible mobile handsets.

   Link to an amendment published at  81 FR 60633 , Sept. 2, 2016.

   (a) Scope of section; definitions. (1) Service providers. (i) On or
   after January 1, 2018 for Tier I carriers and April 1, 2018 for service
   providers other than Tier I carriers, the hearing aid compatibility
   requirements of this section apply to providers of digital mobile
   service in the United States to the extent that they offer terrestrial
   mobile service that enables two-way real-time voice communications
   among members of the public or a substantial portion of the public,
   including both interconnected and non-interconnected VoIP services, and
   such service is provided over frequencies in the 698 MHz to 6 GHz
   bands.

   (ii) Prior to January 1, 2018 for Tier I carriers and April 1, 2018 for
   service providers other than Tier I carriers, the hearing aid
   compatibility requirements of this section apply to providers of
   digital CMRS in the United States to the extent that they offer
   real-time, two-way switched voice or data service that is
   interconnected with the public switched network and utilizes an
   in-network switching facility that enables the provider to reuse
   frequencies and accomplish seamless hand-offs of subscriber calls, and
   such service is provided over frequencies in the 698 MHz to 6 GHz
   bands.

   (2) Manufacturers. On or after January 1, 2018, the requirements of
   this section also apply to the manufacturers of the wireless handsets
   that are used in delivery of the services specified in paragraph
   (a)(1)(i) of this section. Prior to January 1, 2018, the requirements
   of this section also apply to the manufacturers of the wireless
   handsets that are used in delivery of the services specified in
   paragraph (a)(1)(ii) of this section.

   (3) Definitions. For purposes of this section:

   (i) Handset refers to a device used in delivery of the services
   specified in paragraph (a)(1) of this section that contains a built-in
   speaker and is typically held to the ear in any of its ordinary uses.

   (ii) Manufacturer refers to a wireless handset manufacturer to which
   the requirements of this section apply.

   (iii) Model refers to a wireless handset device that a manufacturer has
   designated as a distinct device model, consistent with its own
   marketing practices. However, if a manufacturer assigns different model
   device designations solely to distinguish units sold to different
   carriers, or to signify other distinctions that do not relate to either
   form, features, or capabilities, such designations shall not count as
   distinct models for purposes of this section.

   (iv) Service provider refers to a provider of digital mobile service to
   which the requirements of this section apply.

   (v) Tier I carrier refers to a CMRS provider that offers such service
   nationwide.

   (b) Hearing aid compatibility; technical standards—(1) For radio
   frequency interference. A wireless handset submitted for equipment
   certification or for a permissive change relating to hearing aid
   compatibility must meet, at a minimum, the M3 rating associated with
   the technical standard set forth in either the standard document
   “American National Standard Methods of Measurement of Compatibility
   Between Wireless Communication Devices and Hearing Aids,” ANSI
   C63.19-2007 or ANSI C63.19-2011. Any grants of certification issued
   before January 1, 2010, under previous versions of ANSI C63.19 remain
   valid for hearing aid compatibility purposes.

   (2) For inductive coupling. A wireless handset submitted for equipment
   certification or for a permissive change relating to hearing aid
   compatibility must meet, at a minimum, the T3 rating associated with
   the technical standard set forth in either the standard document
   “American National Standard Methods of Measurement of Compatibility
   Between Wireless Communication Devices and Hearing Aids,” ANSI
   C63.19-2007 or ANSI C63.19-2011. Any grants of certification issued
   before January 1, 2010, under previous versions of ANSI C63.19 remain
   valid for hearing aid compatibility purposes.

   (3) Handsets operating over multiple frequency bands or air interfaces.
   (i) Except as provided in paragraph (b)(3)(ii) of this section, a
   wireless handset used for digital mobile service only over the 698 MHz
   to 6 GHz frequency bands is hearing aid-compatible with regard to radio
   frequency interference or inductive coupling if it meets the applicable
   technical standard set forth in paragraph (b)(1) or (b)(2) of this
   section for all frequency bands and air interfaces over which it
   operates, and the handset has been certified as compliant with the test
   requirements for the applicable standard pursuant to § 2.1033(d) of this
   chapter. A wireless handset that incorporates operations outside the
   698 MHz to 6 GHz frequency bands is hearing aid-compatible if the
   handset otherwise satisfies the requirements of this paragraph (b).

   (ii) A handset that is introduced by the manufacturer prior to July 17,
   2013, and that does not meet the requirements for hearing aid
   compatibility under paragraph (b)(3)(i) of this section, is hearing
   aid-compatible for radio frequency interference or inductive coupling
   only with respect to those frequency bands and air interfaces for which
   technical standards are stated in ANSI C63.19-2007 if it meets, at a
   minimum, an M3 rating (for radio frequency interference) or a T3 rating
   (for inductive coupling) under ANSI C63.19-2007 for all such frequency
   bands and air interfaces over which it operates, and the handset has
   been certified as compliant with the test requirements for the
   applicable standard pursuant to § 2.1033(d) of this chapter.

   (4) All factual questions of whether a wireless handset meets the
   technical standard(s) of this paragraph shall be referred for
   resolution to the Chief, Office of Engineering and Technology, Federal
   Communications Commission, 445 12th Street, SW., Washington, DC 20554.

   (c) Phase-in of requirements relating to radio frequency interference.
   The following applies to each manufacturer and service provider that
   offers wireless handsets used in the delivery of the services specified
   in paragraph (a) of this section and that does not fall within the de
   minimis exception set forth in paragraph (e) of this section. However,
   prior to July 17, 2014 for manufacturers and Tier I carriers and
   October 17, 2014 for service providers other than Tier I carriers, the
   requirements of this section do not apply to handset operations over
   frequency bands and air interfaces for which technical standards are
   not stated in ANSI C63.19-2007.

   (1) Manufacturers—(i) Number of hearing aid-compatible handset models
   offered. For each digital air interface for which it offers wireless
   handsets in the United States or imported for use in the United States,
   each manufacturer of wireless handsets must offer handset models that
   comply with paragraph (b)(1) of this section. Prior to September 8,
   2011, handset models for purposes of this paragraph include only models
   offered to service providers in the United States.

   (A) If it offers four to six models, at least two of those handset
   models must comply with the requirements set forth in paragraph (b)(1)
   of this section.

   (B) If it offers more than six models, at least one-third of those
   handset models (rounded down to the nearest whole number) must comply
   with the requirements set forth in paragraph (b)(1) of this section.

   (ii) Refresh requirement. Beginning in calendar year 2009, and for each
   year thereafter that it elects to produce a new model, each
   manufacturer that offers any new model for a particular air interface
   during the calendar year must “refresh” its offerings of hearing
   aid-compatible handset models by offering a mix of new and existing
   models that comply with paragraph (b)(1) of this section according to
   the following requirements:

   (A) For manufacturers that offer three models per air interface, at
   least one new model rated M3 or higher shall be introduced every other
   calendar year.

   (B) For manufacturers that offer four or more models operating over a
   particular air interface, the number of models rated M3 or higher that
   must be new models introduced during that calendar year is equal to
   one-half of the minimum number of models rated M3 or higher required
   for that air interface (rounded up to the nearest whole number).

   (C) Beginning September 10, 2012, for manufacturers that together with
   their parent, subsidiary, or affiliate companies under common ownership
   or control, have had more than 750 employees for at least two years and
   that offer two models over an air interface for which they have been
   offering handsets for at least two years, at least one new model rated
   M3 or higher shall be introduced every other calendar year.

   (2) Tier I carriers. For each digital air interface for which it offers
   wireless handsets to customers, each Tier I carrier must either:

   (i) Ensure that at least fifty (50) percent of the handset models it
   offers comply with paragraph (b)(1) of this section, calculated based
   on the total number of unique digital wireless handset models the
   carrier offers nationwide; or

   (ii) Ensure that it offers, at a minimum, the following specified
   number of handset models that comply with paragraph (b)(1) of this
   section:

   (A) Prior to February 15, 2009, at least eight (8) handset models;

   (B) Beginning February 15, 2009, at least nine (9) handset models; and

   (C) Beginning February 15, 2010, at least ten (10) handset models.

   (3) Service providers other than Tier I carriers. For each digital air
   interface for which it offers wireless handsets to customers, each
   service provider other than a Tier I carrier must:

   (i) Prior to September 7, 2008, include in the handset models it offers
   at least two handset models that comply with paragraph (b)(1) of this
   section;

   (ii) Beginning September 7, 2008, either:

   (A) Ensure that at least fifty (50) percent of the handset models it
   offers comply with paragraph (b)(1) of this section, calculated based
   on the total number of unique digital wireless handset models the
   service provider offers nationwide; or

   (B) Ensure that it offers, at a minimum, the following specified number
   of handset models that comply with paragraph (b)(1) of this section:

   (1) Until May 15, 2009, at least eight (8) handset models;

   (2) Beginning May 15, 2009, at least nine (9) handset models; and

   (3) Beginning May 15, 2010, at least ten (10) handset models.

   (4) All service providers. The following requirements apply to Tier I
   carriers and all other service providers.

   (i) In-store testing. Each service provider must make available for
   consumers to test, in each retail store owned or operated by the
   provider, all of its handset models that comply with paragraph (b)(1)
   of this section.

   (ii) Offering models with differing levels of functionality. Each
   service provider must offer its customers a range of hearing
   aid-compatible models with differing levels of functionality (e.g.,
   operating capabilities, features offered, prices). Each provider may
   determine the criteria for determining these differing levels of
   functionality, and must disclose its methodology to the Commission
   pursuant to paragraph (i)(3)(vii) of this section.

   (d) Phase-in of requirements relating to inductive coupling capability.
   The following applies to each manufacturer and service provider that
   offers wireless handsets used in the delivery of the services specified
   in paragraph (a) of this section and that does not fall within the de
   minimis exception set forth in paragraph (e) of this section. However,
   prior to July 17, 2014 for manufacturers and Tier I carriers and
   October 17, 2014 for service providers other than Tier I carriers, the
   requirements of this section do not apply to handset operations over
   frequency bands and air interfaces for which technical standards are
   not stated in ANSI C63.19-2007.

   (1) Manufacturers. Each manufacturer offering to service providers four
   or more handset models, and beginning September 8, 2011, each
   manufacturer offering four or more handset models, in a digital air
   interface for use in the United States or imported for use in the
   United States must ensure that it offers to service providers, and
   beginning September 8, 2011, must ensurel that it offers, at a minimum,
   the following number of handset models that comply with the
   requirements set forth in paragraph (b)(2) of this section, whichever
   number is greater in any given year.

   (i) At least two (2) handset models in that air interface; or

   (ii) At least the following percentage of handset models (rounded down
   to the nearest whole number):

   (A) Beginning February 15, 2009, at least twenty (20) percent of its
   handset models in that air interface, provided that, of any such models
   introduced during calendar year 2009, one model may be rated using ANSI
   C63.19-2006 (June 12, 2006), and all other models introduced during
   that year or subsequent years shall be rated using ANSI C63.19-2007
   (June 8, 2007) or subsequently adopted version as may be approved
   pursuant to paragraph (k);

   (B) Beginning February 15, 2010, at least twenty-five (25) percent of
   its handset models in that air interface; and

   (C) Beginning February 15, 2011, at least one-third of its handset
   models in that air interface.

   (2) Tier I carriers. For each digital air interface for which it offers
   wireless handsets to service providers, each Tier I carrier must:

   (i) Ensure that at least one-third of the handset models it offers
   comply with paragraph (b)(2) of this section, calculated based on the
   total number of unique digital wireless handset models the carrier
   offers nationwide; or

   (ii) Ensure that it offers, at a minimum, the following specified
   number of handset models that comply with paragraph (b)(2) of this
   section:

   (A) Prior to February 15, 2009, at least three (3) handset models;

   (B) Beginning February 15, 2009, at least five (5) handset models;

   (C) Beginning February 15, 2010, at least seven (7) handset models; and

   (D) Beginning February 15, 2011, at least ten (10) handset models.

   (3) Service providers other than Tier I carriers. For each digital air
   interface for which it offers wireless handsets to customers, each
   service provider other than a Tier I carrier must:

   (i) Prior to September 7, 2008, include in the handset models it offers
   at least two handset models that comply with paragraph (b)(2) of this
   section;

   (ii) Beginning September 7, 2008, either:

   (A) Ensure that at least one-third of the handset models it offers
   comply with paragraph (b)(2) of this section, calculated based on the
   total number of unique digital wireless handset models the carrier
   offers nationwide; or

   (B) Ensure that it offers, at a minimum, the following specified number
   of handset models that comply with paragraph (b)(2) of this section:

   (1) Until May 15, 2009, at least three (3) handset models;

   (2) Beginning May 15, 2009, at least five (5) handset models;

   (3) Beginning May 15, 2010, at least seven (7) handset models; and

   (4) Beginning May 15, 2011, at least ten (10) handset models.

   (4) All service providers. The following requirements apply to Tier I
   carriers and all other service providers.

   (i) In-store testing. Each service provider must make available for
   consumers to test, in each retail store owned or operated by the
   provider, all of its handset models that comply with paragraph (b)(2)
   of this section.

   (ii) Offering models with differing levels of functionality. Each
   service provider must offer its customers a range of hearing
   aid-compatible models with differing levels of functionality (e.g.,
   operating capabilities, features offered, prices). Each provider may
   determine the criteria for determining these differing levels of
   functionality, and must disclose its methodology to the Commission
   pursuant to paragraph (i)(3)(vii) of this section.

   (e) De minimis exception. (1)(i) Manufacturers or service providers
   that offer two or fewer digital wireless handsets in an air interface
   in the United States are exempt from the requirements of this section
   in connection with that air interface, except with regard to the
   reporting requirements in paragraph (i) of this section. Service
   providers that obtain handsets only from manufacturers that offer two
   or fewer digital wireless handset models in an air interface in the
   United States are likewise exempt from the requirements of this section
   other than paragraph (i) of this section in connection with that air
   interface.

   (ii) Notwithstanding paragraph (e)(1)(i) of this section, beginning
   September 10, 2012, manufacturers that have had more than 750 employees
   for at least two years and service providers that have had more than
   1500 employees for at least two years, and that have been offering
   handsets over an air interface for at least two years, that offer one
   or two digital wireless handsets in that air interface in the United
   States must offer at least one handset model compliant with paragraphs
   (b)(1) and (b)(2) of this section in that air interface, except as
   provided in paragraph (e)(1)(iii) of this section. Service providers
   that obtain handsets only from manufacturers that offer one or two
   digital wireless handset models in an air interface in the United
   States, and that have had more than 750 employees for at least two
   years and have offered handsets over that air interface for at least
   two years, are required to offer at least one handset model in that air
   interface compliant with paragraphs (b)(1) and (b)(2) of this section,
   except as provided in paragraph (e)(1)(iii) of this section. For
   purposes of this paragraph, employees of a parent, subsidiary, or
   affiliate company under common ownership or control with a manufacturer
   or service provider are considered employees of the manufacturer or
   service provider. Manufacturers and service providers covered by this
   paragraph must also comply with all other requirements of this section.

   (iii) Manufacturers and service providers that offer one or two digital
   handset models that operate over the GSM air interface in the 1900 MHz
   band may satisfy the requirements of paragraph (e)(1)(ii) of this
   section by offering at least one handset model that complies with
   paragraph (b)(2) of this section and that either complies with
   paragraph (b)(1) of this section or meets the following conditions:

   (A) The handset enables the user optionally to reduce the maximum power
   at which the handset will operate by no more than 2.5 decibels, except
   for emergency calls to 911, only for GSM operations in the 1900 MHz
   band;

   (B) The handset would comply with paragraph (b)(1) of this section if
   the power as so reduced were the maximum power at which the handset
   could operate; and

   (C) Customers are informed of the power reduction mode as provided in
   paragraph (f)(3) of this section. Manufacturers and service providers
   covered by this paragraph must also comply with all other requirements
   of this section.

   (2) Manufacturers or service providers that offer three digital
   wireless handset models in an air interface must offer at least one
   handset model compliant with paragraphs (b)(1) and (b)(2) of this
   section in that air interface. Service providers that obtain handsets
   only from manufacturers that offer three digital wireless handset
   models in an air interface in the United States are required to offer
   at least one handset model in that air interface compliant with
   paragraphs (b)(1) and (b)(2) of this section.

   (f) Labeling and disclosure requirements—(1) Labeling requirements.
   Manufacturers and service providers shall ensure that handsets that are
   hearing aid-compatible, as defined in paragraph (b) of this section,
   clearly display the rating, as defined in paragraphs (b)(1) and (b)(2)
   of this section, on the packaging material of the handset. In the event
   that a hearing aid-compatible handset achieves different radio
   interference or inductive coupling ratings over different air
   interfaces or different frequency bands, the RF interference reduction
   and inductive coupling capability ratings displayed shall be the lowest
   rating assigned to that handset for any air interface or frequency
   band. An explanation of the ANSI C63.19 rating system must also be
   included in the device's user's manual or as an insert in the packaging
   material for the handset.

   (2) Disclosure requirements relating to handsets treated as hearing
   aid-compatible over fewer than all their operations.

   (i) Each manufacturer and service provider shall ensure that, wherever
   it provides hearing aid compatibility ratings for a handset that is
   considered hearing aid-compatible under paragraph (b)(3)(ii) of this
   section only with respect to those frequency bands and air interfaces
   for which technical standards are stated in ANSI C63.19-2007 and that
   has not been tested for hearing aid compatibility under ANSI
   C63.19-2011, or any handset that operates over frequencies outside of
   the 698 MHz to 6 GHz bands, it discloses to consumers, by clear and
   effective means (e.g., inclusion of call-out cards or other media,
   revisions to packaging materials, supplying of information on Web
   sites), that the handset has not been rated for hearing aid
   compatibility with respect to some of its operation(s). This disclosure
   shall include the following language:

   This phone has been tested and rated for use with hearing aids for some
   of the wireless technologies that it uses. However, there may be some
   newer wireless technologies used in this phone that have not been
   tested yet for use with hearing aids. It is important to try the
   different features of this phone thoroughly and in different locations,
   using your hearing aid or cochlear implant, to determine if you hear
   any interfering noise. Consult your service provider or the
   manufacturer of this phone for information on hearing aid
   compatibility. If you have questions about return or exchange policies,
   consult your service provider or phone retailer.

   (ii) However, service providers are not required to include this
   language in the packaging material for handsets that incorporate a
   Wi-Fi air interface and that were obtained by the service provider
   before March 8, 2011, provided that the service provider otherwise
   discloses by clear and effective means that the handset has not been
   rated for hearing aid compatibility with respect to Wi-Fi operation.

   (iii) Each manufacturer and service provider shall ensure that,
   wherever it provides hearing aid compatibility ratings for a handset
   that is considered hearing aid-compatible under paragraph (b)(3)(ii) of
   this section only with respect to those frequency bands and air
   interfaces for which technical standards are stated in ANSI
   C63.19-2007, and that the manufacturer has tested and found not to meet
   hearing aid compatibility requirements under ANSI C63.19-2011 for
   operations over one or more air interfaces or frequency bands for which
   technical standards are not stated in ANSI C63.19-2007, it discloses to
   consumers, by clear and effective means (e.g., inclusion of call-out
   cards or other media, revisions to packaging materials, supplying of
   information on Web sites), that the handset does not meet the relevant
   rating or ratings with respect to such operation(s).

   (3) Disclosure requirement relating to handsets that allow the user to
   reduce the maximum power for GSM operation in the 1900 MHz band.
   Handsets offered to satisfy paragraph (e)(1)(iii) of this section shall
   be labeled as meeting an M3 rating. Each manufacturer and service
   provider shall ensure that, wherever this rating is displayed, it
   discloses to consumers, by clear and effective means (e.g., inclusion
   of call-out cards or other media, revisions to packaging materials,
   supplying of information on Web sites), that user activation of a
   special mode is necessary to meet the hearing aid compatibility
   standard. In addition, each manufacturer or service provider shall
   ensure that the device manual or a product insert explains how to
   activate the special mode and that doing so may result in a reduction
   of coverage.

   (g) Model designation requirements. Where a manufacturer has made
   physical changes to a handset that result in a change in the hearing
   aid compatibility rating under paragraph (b)(1) or (b)(2) of this
   section, the altered handset must be given a model designation distinct
   from that of the handset prior to its alteration.

   (h) Web site requirements. Beginning January 15, 2009, each
   manufacturer and service provider subject to this section that operates
   a publicly-accessible Web site must make available on its Web site a
   list of all hearing aid-compatible models currently offered, the
   ratings of those models, and an explanation of the rating system. Each
   service provider must also specify on its Web site, based on the levels
   of functionality that the service provider has defined, the level that
   each hearing aid-compatible model falls under as well as an explanation
   of how the functionality of the handsets varies at the different
   levels.

   (i) Reporting requirements—(1) Reporting dates. Manufacturers shall
   submit reports on efforts toward compliance with the requirements of
   this section on January 15, 2009 and on July 15, 2009, and on an annual
   basis on July 15 thereafter. Service providers shall submit reports on
   efforts toward compliance with the requirements of this section on
   January 15, 2009, and annually thereafter. Information in the reports
   must be up-to-date as of the last day of the calendar month preceding
   the due date of the report.

   (2) Content of manufacturer reports. Reports filed by manufacturers
   must include:

   (i) Digital wireless handset models tested, since the most recent
   report, for compliance with the applicable hearing aid compatibility
   technical ratings;

   (ii) Compliant handset models offered to service providers since the
   most recent report, identifying each model by marketing model
   name/number(s) and FCC ID number;

   (iii) For each compliant model, the air interface(s) and frequency
   band(s) over which it operates, the hearing aid compatibility ratings
   for each frequency band and air interface under ANSI Standard C63.19,
   the ANSI Standard C63.19 version used, and the months in which the
   model was available to service providers since the most recent report;

   (iv) Non-compliant models offered to service providers since the most
   recent report, identifying each model by marketing model name/number(s)
   and FCC ID number;

   (v) For each non-compliant model, the air interface(s) over which it
   operates and the months in which the model was available to service
   providers since the most recent report;

   (vi) Total numbers of compliant and non-compliant models offered to
   service providers for each air interface as of the time of the report;

   (vii) Any instance, as of the date of the report or since the most
   recent report, in which multiple compliant or non-compliant devices
   were marketed under separate model name/numbers but constitute a single
   model for purposes of the hearing aid compatibility rules, identifying
   each device by marketing model name/number and FCC ID number;

   (viii) Status of product labeling;

   (ix) Outreach efforts; and

   (x) If the manufacturer maintains a public Web site, the Web site
   address of the page(s) containing the information regarding hearing
   aid-compatible handset models required by paragraph (h) of this
   section.

   Note to paragraph (i)(2): For reports due on January 15, 2009,
   information provided with respect to paragraphs (i)(2)(ii)
   through(i)(2)(v) and (i)(2)(vii) and (i)(2)(viii) need be provided only
   for the six-month period from July 1 to December 31, 2008.

   (3) Content of service provider reports. Reports filed by service
   providers must include:

   (i) Compliant handset models offered to customers since the most recent
   report, identifying each model by marketing model name/number(s) and
   FCC ID number;

   (ii) For each compliant model, the air interface(s) and frequency
   band(s) over which it operates, the hearing aid compatibility ratings
   for each frequency band and air interface under ANSI Standard C63.19,
   and the months in which the model was available since the most recent
   report;

   (iii) Non-compliant models offered since the most recent report,
   identifying each model by marketing model name/number(s) and FCC ID
   number;

   (iv) For each non-compliant model, the air interface(s) over which it
   operates and the months in which the model was available since the most
   recent report;

   (v) Total numbers of compliant and non-compliant models offered to
   customers for each air interface over which the service provider offers
   service as of the time of the report;

   (vi) Information related to the retail availability of compliant
   handset models;

   (vii) The levels of functionality into which the compliant handsets
   fall and an explanation of the service provider's methodology for
   determining levels of functionality;

   (viii) Status of product labeling;

   (ix) Outreach efforts; and

   (x) If the service provider maintains a public Web site, the Web site
   address of the page(s) containing the information regarding hearing
   aid-compatible handset models required by paragraph (h) of this
   section.

   Note to paragraph (i)(3): For reports due on January 15, 2009,
   information provided with respect to paragraphs (i)(3)(i) through
   (i)(3)(iv) and (i)(3)(vi) through (i)(3)(viii) need be provided only
   for the six-month period from July 1 to December 31, 2008.

   (4) Format. The Wireless Telecommunications Bureau is delegated
   authority to approve or prescribe formats and methods for submission of
   these reports. Any format that the Bureau may approve or prescribe
   shall be made available on the Bureau's Web site.

   (j) Enforcement. Enforcement of this section is hereby delegated to
   those states that adopt this section and provide for enforcement. The
   procedures followed by a state to enforce this section shall provide a
   30-day period after a complaint is filed, during which time state
   personnel shall attempt to resolve a dispute on an informal basis. If a
   state has not adopted or incorporated this section, or failed to act
   within six (6) months from the filing of a complaint with the state
   public utility commission, the Commission will accept such complaints.
   A written notification to the complainant that the state believes
   action is unwarranted is not a failure to act. The procedures set forth
   in part 68, subpart E of this chapter are to be followed.

   (k) Delegation of rulemaking authority. (1) The Chief of the Wireless
   Telecommunications Bureau and the Chief of the Office of Engineering
   and Technology are delegated authority, by notice-and-comment
   rulemaking, to issue an order amending this section to the extent
   necessary to adopt technical standards for additional frequency bands
   and/or air interfaces upon the establishment of such standards by ANSI
   Accredited Standards Committee C63TM, provided that the standards do
   not impose with respect to such frequency bands or air interfaces
   materially greater obligations than those imposed on other services
   subject to this section. Any new obligations on manufacturers and Tier
   I carriers pursuant to paragraphs (c) through (i) of this section as a
   result of such standards shall become effective no less than one year
   after release of the order adopting such standards and any new
   obligations on other service providers shall become effective no less
   than 15 months after the release of such order, except that any new
   obligations on manufacturers and service providers subject to paragraph
   (e)(1)(ii) of this section shall become effective no less than two
   years after the release of such order.

   (2) The Chief of the Wireless Telecommunications Bureau and the Chief
   of the Office of Engineering and Technology are delegated authority, by
   notice-and-comment rulemaking if required by statute or otherwise in
   the public interest, to issue an order amending this section to the
   extent necessary to approve any version of the technical standards for
   radio frequency interference or inductive coupling adopted subsequently
   to ANSI C63.19-2007 for use in determining whether a wireless handset
   meets the appropriate rating over frequency bands and air interfaces
   for which technical standards have previously been adopted either by
   the Commission or pursuant to paragraph (k)(1) of this section. This
   delegation is limited to the approval of changes to the technical
   standard that do not raise major compliance issues. Further, by such
   approvals, the Chiefs may only permit, and not require, the use of such
   subsequent versions of standard document ANSI C63.19 to establish
   hearing aid compatibility.

   (l) The standards required in this section are incorporated by
   reference into this section with the approval of the Director of the
   Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce
   any edition other than those specified in this section, the FCC must
   publish notice of change in the Federal Register and the material must
   be available to the public. All approved material is available for
   inspection at the Federal Communications Commission (FCC), 445 12th St.
   SW., Reference Information Center, Room CY-A257, Washington, DC 20554
   and is available from the sources indicated below. It is also available
   for inspection at the National Archives and Records Administration
   (NARA). For information on the availability of this material at NARA,
   call 202-741-6030 or go to
   http://www.archives.gov/federal_register/code_of_federal_regulations/ib
   r_locations.html.

   (1) IEEE Operations Center, 445 Hoes Lane, Piscataway, NJ 08854-4141,
   (732) 981-0060, http://www.ieee.org/portal/site.

   (i) ANSI C63.19-2007, American National Standard Methods of Measurement
   of Compatibility between Wireless Communication Devices and Hearing
   Aids, June 8, 2007

   (ii) ANSI C63.19-2011, American National Standard Methods of
   Measurement of Compatibility between Wireless Communication Devices and
   Hearing Aids, May 27, 2011

   (2) [Reserved]

   [ 73 FR 25587 , May 7, 2008, as amended at  75 FR 54522 , Sept. 8, 2010;  77 FR 41928 , July 17, 2012;  81 FR 183 , Jan. 5, 2016]

   return arrow Back to Top