Goto Section: 95.632 | 95.635 | Table of Contents

FCC 95.633
Revised as of October 2, 2015
Goto Year:2014 | 2016
  § 95.633   Emission bandwidth.

   (a)  The  authorized  bandwidth  (maximum  permissible  bandwidth of a
   transmission) for emission type H1D, J1D, R1D, H3E, J3E or R3E is 4 kHz. The
   authorized bandwidth for emission type A1D or A3E is 8 kHz. The authorized
   bandwidth for emission type F1D, G1D, F3E or G3E is 20 kHz.

   (b) The authorized bandwidth for any emission type transmitted by an R/C
   transmitter is 8 kHz.

   (c) The authorized bandwidth for emission type F3E or F2D transmitted by a
   FRS unit is 12.5 kHz.

   (d) For transmitters in the LPR§ 

   (1) The authorized bandwidth for narrowband frequencies is 4 kHz and the
   channel bandwidth is 5 kHz

   (2) The channel bandwidth for standard band frequencies is 25 kHz.

   (3) The channel bandwidth for extra band frequencies is 50 kHz.

   (4) AMTS stations may use the 216.750-217.000 MHz band as a single 250 kHz
   channel so long as the signal is attenuated as specified in § 95.635(c).

   (e) For transmitters in the MedRadio Service:

   (1) For stations operating in 402-405 MHz, the maximum authorized emission
   bandwidth is 300 kHz. For stations operating in 401-401.85 MHz or 405-406
   MHz, the maximum authorized emission bandwidth is 100 kHz. For stations
   operating in 401.85-402 MHz, the maximum authorized emission bandwidth is
   150 kHz. For stations operating in 413-419 MHz, 426-432 MHz, 438-444 MHz, or
   451-457 MHz, the maximum authorized emission bandwidth is 6 megahertz. For
   stations  operating  in 2360-2400 MHz, the maximum authorized emission
   bandwidth is 5 megahertz.

   (2) Lesser emission bandwidths may be employed, provided that the unwanted
   emissions  are  attenuated  as  provided  in § 95.635. See § § 95.627(g),
   § 95.628(h),  and  95.639(f)  regarding  maximum  transmitter power and
   measurement procedures.

   (3) Emission bandwidth will be determined by measuring the width of the
   signal between points, one below the carrier center frequency and one above
   the carrier center frequency, that are 20 dB down relative to the maximum
   level of the modulated carrier. Compliance with the emission bandwidth limit
   is based on the use of measurement instrumentation employing a peak detector
   function with an instrument resolution bandwidth approximately equal to 1.0
   percent of the emission bandwidth of the device under measurement.

   (f) The authorized bandwidth for any emission type transmitted by a MURS
   transmitter is specified as follows:

   (1) Emissions on frequencies 151.820 MHz, 151.880 MHz, and 151.940 MHz are
   limited to 11.25 kHz.

   (2) Emissions on frequencies 154.570 and 154.600 MHz are limited to 20.0
   kHz.

   (3) Provided, however, that all A3E emissions are limited to 8 kHz.

   (g) DSRCS-OBUs are governed under subpart L of this part.

   [ 53 FR 36789 , Sept. 22, 1988. Redesignated and amended at  61 FR 28769 , June
   6, 1996, and further redesignated and amended at  61 FR 46567 , 46568, Sept.
   4, 1996;  64 FR 69930 , Dec. 15, 1999;  65 FR 60878 , Oct. 13, 2000;  67 FR 63289 , Oct. 11, 2002;  68 FR 9902 , Mar. 3, 2003;  69 FR 46446 , Aug. 3, 2004;
    74 FR 22707 , May 14, 2009;  77 FR 4268 , Jan. 27, 2012;  77 FR 55733 , Sept. 11,
   2012]

   return arrow Back to Top


Goto Section: 95.632 | 95.635

Goto Year: 2014 | 2016
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public