Goto Section: 15.23 | 15.27 | Table of Contents
FCC 15.25
Revised as of October 2, 2015
Goto Year:2014 |
2016
§ 15.25 Kits.
A TV interface device, including a cable system terminal device, which is
marketed as a kit shall comply with the following requirements:
(a) All parts necessary for the assembled device to comply with the
technical requirements of this part must be supplied with the kit. No
mechanism for adjustment that can cause operation in violation of the
requirements of this part shall be made accessible to the builder.
(b) At least two units of the kit shall be assembled in exact accordance
with the instructions supplied with the product to be marketed. If all
components required to fully complete the kit (other than those specified in
paragraph (a) of this section which are needed for compliance with the
technical provisions and must be included with the kit) are not normally
furnished with the kit, assembly shall be made using the recommended
components. The assembled units shall be certified or authorized under the
Declaration of Conformity procedure, as appropriate, pursuant to the
requirements of this part.
(1) The measurement data required for a TV interface device subject to
certification shall be obtained for each of the two units and submitted with
an application for certification pursuant to subpart J of part 2 of this
chapter.
(2) The measurement data required for a TV interface device subject to
Declaration of Conformity shall be obtained for the units tested and
retained on file pursuant to the provisions of subpart J of part 2 of this
chapter.
(c) A copy of the exact instructions that will be provided for assembly of
the device shall be submitted with an application for certification. Those
parts which are not normally furnished shall be detailed in the application
for equipment authorization.
(d) In lieu of the label required by § 15.19, the following label, along with
the label bearing the FCC identifier and other information specified in
§ § 2.925 and 2.926, shall be included in the kit with instructions to the
builder that it shall be attached to the completed kit:
(Name of Grantee)
(FCC Identifier)
This device can be expected to comply with part 15 of the FCC Rules provided
it is assembled in exact accordance with the instructions provided with this
kit. Operation is subject to the following conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received including interference that may cause undesired
operation.
(e) For the purpose of this section, circuit boards used as repair parts for
the replacement of electrically identical defective circuit boards are not
considered to be kits.
[ 54 FR 17714 , Apr. 25, 1989,as amended at 63 FR 36602 , July 7, 1998]
return arrow Back to Top
Goto Section: 15.23 | 15.27
Goto Year: 2014 |
2016
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public