§ 95.424   (CB Rule 24) How do I have my CB station transmitter serviced?

   (a) You may adjust an antenna to your CB transmitter and you may make
   radio checks. (A radio check means a one way transmission for a short
   time in order to test the transmitter.)

   (b) You are responsible for the proper operation of the station at all
   times and are expected to provide for observations, servicing and
   maintenance as often as may be necessary to ensure proper operation.
   You must have all internal repairs or internal adjustments to your CB
   transmitter made in accordance with the Technical Regulations (see
   subpart E). The internal repairs or internal adjustments should be
   performed by or under the immediate supervision and responsibility of a
   person certified as technically qualified to perform transmitter
   maintenance and repair duties in the private land mobile services and
   fixed services by an organization or committee representative of users
   in those services.

   (c) Except as provided in paragraph (d) of this section, each internal
   repair and each internal adjustment of a CB transmitter in which
   signals are transmitted must be made using a nonradiating ("dummy")
   antenna.

   (d) Brief test signals (signals not longer than one minute during any
   five minute period) using a radiating antenna may be transmitted in
   order to:

   (1) Adjust an antenna to a transmitter;

   (2) Detect or measure radiation of energy other than the intended
   signal; or

   (3) Tune a receiver to your CB transmitter.

   (Secs. 4(i) and 303(r), Communications Act of 1934, as amended, 47
   U.S.C. 154(i) and 303(r), and sec. 553 of the Administrative Procedures
   Act, 5 U.S.C. 553)

   [ 48 FR 24894 , June 3, 1983, as amended at  49 FR 20673 , May 16, 1984]

   return arrow Back to Top