Goto Section: 2.1074 | 2.1076 | Table of Contents
FCC 2.1075
Revised as of December 4, 2012
Goto Year:2011 |
2013
§ 2.1075 Retention of records.
(a) Except as shown in paragraph (b) of this section, for each product
subject to a Declaration of Conformity, the responsible party, as shown
in § 2.909, shall maintain the following records:
(1) A record of the original design drawings and specifications and all
changes that have been made that may affect compliance with the
requirements of § 2.1073.
(2) A record of the procedures used for production inspection and
testing (if tests were performed) to insure the conformance required by
§ 2.1073. (Statistical production line emission testing is not
required.)
(3) A record of the measurements made on an appropriate test site that
demonstrates compliance with the applicable regulations. The record
shall contain:
(i) The actual date or dates testing was performed;
(ii) The name of the test laboratory, company, or individual performing
the testing. The Commission may request additional information
regarding the test site, the test equipment or the qualifications of
the company or individual performing the tests;
(iii) A description of how the device was actually tested, identifying
the measurement procedure and test equipment that was used;
(iv) A description of the equipment under test (EUT) and support
equipment connected to, or installed within, the EUT;
(v) The identification of the EUT and support equipment by trade name
and model number and, if appropriate, by FCC Identifier and serial
number;
(vi) The types and lengths of connecting cables used and how they were
arranged or moved during testing;
(vii) At least two photographs showing the test set-up for the highest
line conducted emission and showing the test set-up for the highest
radiated emission. These photographs must be focused originals which
show enough detail to confirm other information contained in the test
report;
(viii) A description of any modifications made to the EUT by the
testing company or individual to achieve compliance with the
regulations;
(ix) All of the data required to show compliance with the appropriate
regulations;
(x) The signature of the individual responsible for testing the product
along with the name and signature of an official of the responsible
party, as designated in § 2.909; and
(xi) A copy of the compliance information, as described in § 2.1077,
required to be provided with the equipment.
(b) If the equipment is assembled using modular components that, by
themselves, are subject to authorization under a Declaration of
Conformity and/or a grant of certification, and the assembled product
is also subject to authorization under a Declaration of Conformity but,
in accordance with the applicable regulations, does not require
additional testing, the assembler shall maintain the following records
in order to show the basis on which compliance with the standards was
determined:
(1) A listing of all of the components used in the assembly;
(2) Copies of the compliance information, as described in § 2.1077 for
all of the modular components used in the assembly;
(3) A listing of the FCC Identifier numbers for all of the components
used in the assembly that are authorized under a grant of
certification;
(4) A listing of equipment modifications, if any, that were made during
assembly; and
(5) A copy of any instructions included with the components that were
required to be followed to ensure the assembly of a compliant product,
along with a statement, signed by the assembler, that these
instructions were followed during assembly. This statement shall also
contain the name and signature of an official of the responsible party,
as designated in § 2.909.
(c) The records listed in paragraphs (a) and (b) of this section shall
be retained for two years after the manufacture or assembly, as
appropriate, of said equipment has been permanently discontinued, or
until the conclusion of an investigation or a proceeding if the
responsible party is officially notified that an investigation or any
other administrative proceeding involving the equipment has been
instituted. Requests for the records described in this section and for
sample units also are covered under the provisions of § 2.946.
[ 61 FR 31047 , June 19, 1996]
return arrow Back to Top
Goto Section: 2.1074 | 2.1076
Goto Year: 2011 |
2013
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public