Goto Section: 80.1013 | 80.1017 | Table of Contents
FCC 80.1015
Revised as of October 1, 2011
Goto Year:2010 |
2012
§ 80.1015 Power supply.
(a) There must be readily available for use under normal load
conditions, a power supply sufficient to simultaneously energize the
bridge-to-bridge transmitter at its required antenna power, and the
bridge-to-bridge receiver. Under this load condition the voltage of the
power supply at the power input terminals of the bridge-to-bridge
radiotelephone installation must not deviate from its rated voltage by
more than 10 percent on vessels completed on or after March 1, 1957,
nor by more than 15 percent on vessels completed before that date.
(b) When the power supply for a nonportable bridge-to-bridge
radiotelephone installation consists of or includes batteries, they
must be installed as high above the bilge as practicable, secured
against shifting with motion of the vessel, and accessible with not
less than 26 cm (10 in.) head room.
(c) Means must be provided for adequately charging any rechargeable
batteries used in the vessel's bridge-to-bridge radiotelephone
installation. There must be provided a device which will give a
continuous indication of the charging current during charging.
[ 51 FR 31213 , Sept. 2, 1986, as amended at 58 FR 44954 , Aug. 25, 1993]
Goto Section: 80.1013 | 80.1017
Goto Year: 2010 |
2012
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public