§  15.37   Transition provisions for compliance with the rules.

   Equipment may be authorized, manufactured and imported under the rules
   in effect prior to June 23, 1989, in accordance with the following
   schedules:

   (a) For all intentional and unintentional radiators, except for
   receivers: Radio frequency equipment verified by the responsible party
   or for which an application for a grant of equipment authorization is
   submitted to the Commission on or after June 23, 1992, shall comply
   with the regulations specified in this part. Radio frequency equipment
   that is manufactured or imported on or after June 23, 1994, shall
   comply with the regulations specified in this part.

   (b) For receivers: Receivers subject to the regulations in this part
   that are manufactured or imported on or after June 23, 1999, shall
   comply with the regulations specified in this part. However, if a
   receiver is associated with a transmitter that could not have been
   authorized under the regulations in effect prior to June 23, 1989,
   e.g., a transmitter operating under the provisions of § 15.209 or
   § 15.249 (below 960 MHz), the transition provisions in this section do
   not apply. Such receivers must comply with the regulations in this
   part. In addition, receivers are subject to the provisions in paragraph
   (f) of this section.

   (c) There are no restrictions on the operation or marketing of
   equipment complying with the regulations in effect prior to June 23,
   1989.

   (d) Prior to May 25, 1991, person shall import, market or operate
   intentional radiators within the band 902-905 MHz under the provisions
   of § 15.249. Until that date, the Commission will not issue a grant of
   equipment authorization for equipment operating under § 15.249 if the
   equipment is designed to permit operation within the band 902-905 MHz.

   (e) For cordless telephones: The manufacture and importation of
   cordless telephones not complying with § 15.214(d) of this part shall
   cease on or before September 11, 1991. These provisions will not apply
   to cordless telephones which are repaired or refurbished, or
   re-imported after repair or refurbishment. Applications for a grant of
   equipment authorization of cordless telephones not complying with
   § 15.214(d) of this part will not be accepted by the Commission after
   May 10, 1991. Cordless telephones that have previously received
   equipment authorization and that, without modification, already comply
   with the requirements of § 15.214(d) of this part, need not be
   reauthorized.

   (f) The manufacture or importation of scanning receivers, and frequency
   converters designed or marketed for use with scanning receivers, that
   do not comply with the provisions of § 15.121(a)(1) shall cease on or
   before April 26, 1994. Effective April 26, 1993, the Commission will
   not grant equipment authorization for receivers that do not comply with
   the provisions of § 15.121(a)(1). These rules do not prohibit the sale
   or use of authorized receivers manufactured in the United States, or
   imported into the United States, prior to April 26, 1994.

   (g) For CPU boards and power supplies designed to be used with personal
   computers: The manufacture and importation of these products shall
   cease on or before June 19, 1997 unless these products have been
   authorized under a Declaration of Conformity or a grant of
   certification, demonstrating compliance with all of the provisions in
   this part. Limited provisions, as detailed in § 15.101(d), are provided
   to permit the importation and manufacture of these products subsequent
   to this date where the CPU boards and/or power supplies are marketed
   only to personal computer equipment manufacturers.

   (h) The manufacture or importation of scanning receivers, and frequency
   converters designed or marketed for use with scanning receivers, that
   do not comply with the provisions of § 15.121 shall cease on or before
   October 25, 1999. Effective July 26, 1999 the Commission will not grant
   equipment authorization for receivers that do not comply with the
   provisions of § 15.121. This paragraph does not prohibit the sale or
   use of authorized receivers manufactured in the United States, or
   imported into the United States, prior to October 25, 1999.

   (i) Effective October 16, 2002, an equipment approval may no longer be
   obtained for medical telemetry equipment operating under the provisions
   of § 15.241 or § 15.242. The requirements for obtaining an approval for
   medical telemetry equipment after this date are found in Subpart H of
   Part 95 of this chapter.

   (j) All radio frequency devices that are authorized under the
   certification, verification or declaration of conformity procedures on
   or after July 12, 2004 shall comply with the conducted limits specified
   in § 15.107 or § 15.207 as appropriate. All radio frequency devices
   that are manufactured or imported on or after July 11, 2005 shall
   comply with the conducted limits specified in § 15.107 or § 15.207, as
   appropriate. Equipment authorized, imported or manufactured prior to
   these dates shall comply with the conducted limits specified in
   § 15.107 or § 15.207, as appropriate, or with the conducted limits that
   were in effect immediately prior to September 9, 2002.

   (k) Radar detectors manufactured or imported after August 28, 2002 and
   marketed after September 27, 2002 shall comply with the regulations
   specified in this part. Radar detectors manufactured or imported prior
   to January 27, 2003 may be labeled with the information required by
   § § 2.925 and 15.19(a) of this chapter on the individual equipment
   carton rather than on the device, and are exempt from complying with
   the requirements of § 15.21.

   (l) U-NII equipment operating in the 5.25-5.35 GHz band for which
   applications for certification are filed on or after July 20, 2006
   shall comply with the DFS and TPC requirements specified in § 15.407.
   U-NII equipment operating in the 5.25-5.35 GHz band that are imported
   or marketed on or after July 20, 2007 shall comply with the DFS and TPC
   requirements in § 15.407.

   (m) All Access BPL devices that are manufactured, imported, marketed or
   installed on or after July 7, 2006, shall comply with the requirements
   specified in subpart G of this part, including certification of the
   equipment.

   (n) Marketing of TV band devices operating under subpart H of this part
   is not permitted prior to February 18, 2009.

   [ 54 FR 17714 , Apr. 25, 1989;  54 FR 32339 , Aug. 7, 1989;  55 FR 25095 ,
   June 20, 1990;  56 FR 3785 , Jan. 31, 1991;  58 FR 25575 , Apr. 27, 1993;
    61 FR 31049 , June 19, 1996;  64 FR 22561 , Apr. 27, 1999;  65 FR 44008 ,
   July 17, 2000;  67 FR 45670 , July 10, 2002;  67 FR 48993 , July 29, 2002;
    69 FR 2686 , Jan. 20, 2004;  70 FR 1373 , Jan. 7, 2005;  70 FR 17329 , Apr.
   6, 2005;  71 FR 11540 , Mar. 8, 2006;  74 FR 7326 , Feb. 17, 2009]