Goto Section: 27.54 | 27.56 | Table of Contents
FCC 27.55
Revised as of October 1, 2010
Goto Year:2009 |
2011
§ 27.55 Power strength limits.
(a) Field strength limits. For the following bands, the predicted or
measured median field strength at any location on the geographical
border of a licensee's service area shall not exceed the value
specified unless the adjacent affected service area licensee(s)
agree(s) to a different field strength. This value applies to both the
initially offered service areas and to partitioned service areas.
(1) 2110-2155, 2305-2320 and 2345-2360 MHz bands: 47 dBuV/m.
(2) 698-758 and 775-787 MHz bands: 40 dBuV/m.
(3) The paired 1392-1395 MHz and 1432-1435 MHz bands and the unpaired
1390-1392 MHz band (1.4 GHz band): 47 dBuV/m.
(4) BRS and EB§ The predicted or measured median field strength at any
location on the geographical border of a licensee's service area shall
not exceed the value specified unless the adjacent affected service
area licensee(s) agree(s) to a different field strength. This value
applies to both the initially offered services areas and to partitioned
services areas. Licensees may exceed this signal level where there is
no affected licensee that is constructed and providing service. Once
the affected licensee is providing service, the original licensee will
be required to take whatever steps necessary to comply with the
applicable power level at its GSA boundary, absent consent from the
affected licensee.
(i) Prior to transition, the signal strength at any point along the
licensee's GSA boundary does not exceed the greater of that permitted
under the licensee's Commission authorizations as of January 10, 2005
or 47 dBuV/m.
(ii) Following transition, for stations in the LBS and UBS, the signal
strength at any point along the licensee's GSA boundary must not exceed
47 dBuV/m. This field strength is to be measured at 1.5 meters above
the ground over the channel bandwidth ( i.e. , each 5.5 MHz channel for
licensees that hold a full channel block, and for the 5.5 MHz channel
for licensees that hold individual channels).
(iii) Following transition, for stations in the MBS, the signal
strength at any point along the licensee's GSA boundary must not exceed
the greater of -73.0 + 10 log(X/6) dBW/m^2 , where X is the bandwidth
in megahertz of the channel, or for facilities that are substantially
similar to the licensee's pre-transition facilities (including
modifications that do not alter the fundamental nature or use of the
transmissions), the signal strength at such point that resulted from
the station's operations immediately prior to the transition, provided
that such operations complied with paragraph (a)(4)(i) of this section.
(b) Power flux density limit for stations operating in the 698-746 MHz
bands. For base and fixed stations operating in the 698-746 MHz band in
accordance with the provisions of § 27.50(c)(6), the power flux density
that would be produced by such stations through a combination of
antenna height and vertical gain pattern must not exceed 3000
microwatts per square meter on the ground over the area extending to 1
km from the base of the antenna mounting structure.
(c) Power flux density limit for stations operating in the 746-757 MHz,
758-763 MHz, 776-787 MHz, and 788-793 MHz bands. For base and fixed
stations operating in the 746-757 MHz, 758-763 MHz, 776-787 MHz, and
788-793 MHz bands in accordance with the provisions of § 27.50(b)(6),
the power flux density that would be produced by such stations through
a combination of antenna height and vertical gain pattern must not
exceed 3000 microwatts per square meter on the ground over the area
extending to 1 km from the base of the antenna mounting structure.
[ 69 FR 5715 , Feb. 6, 2004, as amended at 69 FR 72034 , Dec. 10, 2004; 72 FR 27712 , May 16, 2007; 72 FR 48852 , Aug. 24, 2007; 73 FR 26040 , May 8,
2008]
Goto Section: 27.54 | 27.56
Goto Year: 2009 |
2011
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public