Goto Section: 18.207 | 18.211 | Table of Contents

FCC 18.209
Revised as of October 1, 2010
Goto Year:2009 | 2011
  §  18.209   Identification of authorized equipment.

   (a) Each device for which a grant of equipment authorization is issued
   under this part shall be identified pursuant to the applicable
   provisions of subpart J of part 2 of this chapter. Changes in the
   identification of authorized equipment may be made pursuant to § 2.933
   of part 2 of this chapter. FCC Identifiers as described in § § 2.925
   and 2.926 of this chapter shall not be used on equipment subject to
   verification or Declaration of Conformity.

   (b) Devices authorized under the Declaration of Conformity procedure
   shall be labelled with the logo shown below. The label shall not be a
   stick-on, paper label. It shall be permanently affixed to the product
   and shall be readily visible to the purchaser at the time of purchase,
   as described in § 2.925(d) of this chapter. Permanently affixed means
   that the label is etched, engraved, stamped, silkscreened, indelibly
   printed, or otherwise permanently marked on a permanently attached part
   of the equipment or on a nameplate of metal, plastic, or other material
   fastened to the equipment by welding, riveting, or a permanent
   adhesive. The label must be designed to last the expected lifetime of
   the equipment in the environment in which the equipment may be operated
   and must not be readily detachable. The logo follows:
   [er07jy98.027.gif]

   View or download PDF

   [ 63 FR 36603 , July 7, 1998]


Goto Section: 18.207 | 18.211

Goto Year: 2009 | 2011
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public