Goto Section: 97.315 | 97.401 | Table of Contents

FCC 97.317
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  97.317   Standards for certification of external RF power amplifiers.

   (a) To receive a grant of certification, the amplifier must:

   (1) Satisfy the spurious emission standards of  Sec. 97.307 (d) or (e) of this
   part, as applicable, when the amplifier is operated at the lesser of 1.5 kW
   PEP  or  its full output power and when the amplifier is placed in the
   “standby” or “off” positions while connected to the transmitter.

   (2) Not be capable of amplifying the input RF power (driving signal) by more
   than 15 dB gain. Gain is defined as the ratio of the input RF power to the
   output RF power of the amplifier where both power measurements are expressed
   in peak envelope power or mean power.

   (3) Exhibit no amplification (0 dB gain) between 26 MHz and 28 MHz.

   (b) Certification shall be denied when:

   (1) The Commission determines the amplifier can be used in services other
   than the Amateur Radio Service, or

   (2) The amplifier can be easily modified to operate on frequencies between
   26 MHz and 28 MHz.

   [ 71 FR 66465 , Nov. 15, 2006]

Subpart E—Providing Emergency Communications


Goto Section: 97.315 | 97.401

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public