Sec.  95.1217   Labeling requirements.

   (a) Medical implant programmer/controller transmitters shall be labeled as
   provided in part 2 of this chapter and shall bear the following statement in
   a conspicuous location on the device:

   This device may not interfere with stations operating in the 400.150–406.000
   MHz band in the Meteorological Aids, Meteorological Satellite, and Earth
   Exploration Satellite Services and must accept any interference received,
   including interference that may cause undesired operation.

   (b) Where a medical implant programmer/control transmitter is constructed in
   two or more sections connected by wire and marketed together, the statement
   specified in this section is required to be affixed only to the main control
   unit.

   (c) Medical implant transmitters shall be identified with a serial number.
   The  FCC ID number associated with the transmitter and the information
   required by  Sec. 2.925 of the FCC Rules may be placed in the instruction manual
   for the transmitter and on the shipping container for the transmitter, in
   lieu of being placed directly on the transmitter.