Goto Section: 80.765 | 80.769 | Table of Contents

FCC 80.767
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  80.767   Propagation curve.

   The  propagation graph,  Sec. 80.767 Graph 1, must be used in computing the
   service area contour. The graph provides data for field strengths in dBu for
   an effective radiated power of 1 kW, over sea water, fresh water or land
   (smooth earth); transmitting antena heights of 4,800, 3,200, 1,600, 800,
   400, 200, and 100 feet; based on a receiving antenna height of 9 meters (30
   feet),  for the 156–162 MHz band. The use of this is described in this
   section.

   (a) Calculate the effective radiated power of the coast station, Ps in dB
   referred to 1 kW (dBk), as follows:
   [MATH:
   :MATH]

   where,

   Pt=Transmitter output power in dB referred to 1 kW: Transmitter output power
   in watts is converted to dBk by Pt=10 [log10 (Power in watts)]−30. Also see
    Sec. 80.761 Graph 1 for a conversion graph.

   G=Antenna  gain  in dB referred to a standard half-wave dipole, in the
   direction of each plotted radial, and

   L=Line losses between the transmitter and the antenna, in dB.

   Notes: 1. To determine field strengths where the distance is known, for
   effective radiated powers other than 1kW (0 dBk): Enter the graph from the
   “statute miles” scale at the known distance, read up to intersection with
   the curve for the antenna height, read left to the “dBu for 1 kW radiated”
   scale and note the referenced field strength (Fe). The value of the actual
   field strength (F) in dBu will be F=Fe+Ps where Ps is the effective radiated
   power calculated above.

   2. To determine distance, where the actual field strength is specified, for
   effective  radiated  powers  other  than 0 dBk: The value of the field
   referenced strength will be Fe=F−Ps in dBu. Enter the graph, from the “dBu
   for  1  kW radiated” scale at the corrected value of Fe, read right to
   intersection with the antenna height, read down to “statute miles” scale.

   (b) Determine the antenna height. For antenna heights between the heights
   for which this graph is drawn, use linear interpolation; assume linear
   height-gain for antennas higher than 4,800 feet.

   (c) For receiver antenna heights lower than 9 meters (30 feet), assume that
   the field strength is the same as at 9 meters (30 feet).

   (d) Assume that propagation over fresh water or over land is the same as
   that over sea water.
   [ec02ap91.006.gif]

   View or download PDF


Goto Section: 80.765 | 80.769

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public