Goto Section: 73.9003 | 73.9005 | Table of Contents

FCC 73.9004
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  73.9004   Compliance requirements for covered demodulator products: Marked
content.

   (a) A covered demodulator product shall not pass, or direct to be passed,
   marked content to any output except:

   (1) To an analog output;

   (2) To an 8–VSB, 16–VSB, 64–QAM or 256–QAM modulated output, provided that
   the broadcast flag is retained in the both the EIT and PMT;

   (3) To a digital output protected by an authorized digital output protection
   technology, in accordance with any applicable obligations established as a
   part of its approval pursuant to  Sec. 73.9008;

   (4) Where such covered demodulator product outputs, or directs to be output,
   such  content  to another product and such covered demodulator product
   exercises sole control (such as by using a cryptographic protocol), in
   compliance with the demodulator robustness requirements, over the access to
   such content in usable form in such other product;

   (5) Where such covered demodulator product outputs, or directs to be output,
   such content for the purpose of making a recording of such content pursuant
   to paragraph (b)(2) of this section, where such content is protected by the
   corresponding recording method; or

   (6) Where such covered demodulator product is incorporated into a computer
   product and passes, or directs to be passed, such content to an unprotected
   output operating in a mode compatible with the digital visual interface
   (DVI) Rev. 1.0 Specification as an image having the visual equivalent of no
   more  than 350,000 pixels per frame (e.g., an image with resolution of
   720×480 pixels for a 4:3 (nonsquare pixel) aspect ratio), and 30 frames per
   second. Such an image may be attained by reducing resolution, such as by
   discarding, dithering or averaging pixels to obtain the specified value, and
   can be displayed using video processing techniques such as line doubling or
   sharpening to improve the perceived quality of the image.

   (b) A covered demodulator product shall not record or cause the recording of
   marked content in digital form unless such recording is made using one of
   the following methods:

   (1) A method that effectively and uniquely associates such recording with a
   single covered demodulator product (using a cryptographic protocol or other
   effective means) so that such recording cannot be accessed in usable form by
   another product except where the content of such recording is passed to
   another product as permitted under this subpart or

   (2)  An  authorized recording method in accordance with any applicable
   obligations established as a part of its approval pursuant to  Sec. 73.9008
   (provided that for recordings made on removable media, only authorized
   recording  methods  expressly approved pursuant to  Sec. 73.9008 for use in
   connection with removable media may be used).

   (c) Paragraph (b) of this section does not impose restrictions regarding the
   storage of marked content as a transitory image.

   (d) The requirements of this section shall become applicable on July 1,
   2005.


Goto Section: 73.9003 | 73.9005

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public