Goto Section: 80.1101 | 80.1105 | Table of Contents
FCC 80.1103
Revised as of October 1, 2007
Goto Year:2006 |
2008
Sec. 80.1103 Equipment authorization.
(a) All equipment specified in Sec. 80.1101 must be certificated in accordance
with 47 CFR part 2 specifically for GMDSS use, except for equipment used in
the INMARSAT space segment which must be type-approved by INMARSAT and
verified in accordance with 47 CFR part 2 specifically for GMDSS use. The
technical parameters of the equipment must conform to the performance
standards as specified in Sec. 80.1101. For emergency position-indicating
radiobeacons operating on 406.0–406.1 MHz (406.0–406.1 MHz EPIRBs) that were
authorized prior to April 15, 1992, and meet the requirements of Sec. 80.1101,
the manufacturer may attest by letter that the equipment (indicate FCC ID#)
meets the requirements of Sec. 80.1101 and request that it be denoted as
approved for GMDSS use.
(b) Applicants for certification must submit with their applications
measurement data sufficiently complete to ensure compliance with the
technical parameters. The application must include the items listed in 47
CFR 2.1033. Additional measurement data or information may be requested
depending upon the equipment. For items not listed in Sec. 2.1033 of this
chapter, the applicant must attest that the equipment complies with
performance standards as specified in Sec. 80.1101 and, where applicable, that
measurements have been made that demonstrate the necessary compliance.
Submission of representative data demonstrating compliance is not required
unless requested by the Commission.
(c) Applicants for verification must attest that the equipment complies with
performance standards as specified in Sec. 80.1101 and, where applicable, that
measurements have been made that demonstrate the necessary compliance.
Submission of representative data demonstrating compliance is not required
unless requested by the Commission. An application must include the items
listed in Sec. Sec. 2.953 and 2.955 of this chapter and a copy of the INMARSAT
type-approval certification indicating that equipment meets GMDSS standards
and includes all peripheral equipment associated with the specific unit
under review.
(d) Submission of a sample unit is not required unless specifically
requested by the Commission.
(e) In addition to the requirements in part 2 of this chapter, equipment
specified in Sec. 80.1101 shall be labeled as follows: “This device complies
with the GMDSS provisions of part 80 of the FCC rules.” Such a label is not
required for emergency position-indicating radiobeacons operating on
406.0–406.1 MHz (406.0–406.1 MHz EPIRBs) that were authorized prior to April
15, 1992.
[ 57 FR 9065 , Mar. 16, 1992, as amended at 57 FR 44702 , Sept. 29, 1992; 63 FR 36607 , July 7, 1998; 68 FR 46980 , Aug. 7, 2003; 69 FR 64680 , Nov. 8, 2004]
Goto Section: 80.1101 | 80.1105
Goto Year: 2006 |
2008
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public