FCC 73.614 Revised as of October 1, 2007
Goto Year:2006 |
2008
Sec. 73.614 Power and antenna height requirements.
(a) Minimum requirements. Applications will not be accepted for filing if
they specify less than −10 dBk (100 watts) horizontally polarized visual
effective radiated power in any horizontal direction. No minimum antenna
height above average terrain is specified.
(b) Maximum power. Applications will not be accepted for filing if they
specify a power which exceeds the maximum permitted boundaries specified in
the following formulas:
(1) Channels 2–6 in Zone I:
ERP[Max]=102.57–33.24*Log[10](HAAT)
And,
−10 dBk ≤ ERP[Max]≤20 dBk
(2) Channels 2–6 in Zones II and III:
ERP[Max]=67.57–17.08* Log[10](HAAT)
And,
10 dBk ≤ ERP[Max]≤20 dBk
(3) Channels 7–13 in Zone I:
ERP[Max]=107.57–33.24* Log[10](HAAT)
And,
−4.0 dBk ≤ ERP[Max]≤25 dBk
(4) Channels 7–13 in Zones II and III:
ERP[Max]=72.57–17.08* Log[10](HAAT)
And,
15 dBk ≤ ERP[Max]≤25 dBk
(5) Channels 14–69 in Zones I, II, and III:
ERP[Max]=84.57–17.08* Log[10](HAAT)
And,
27 dBk ≤ ERP[Max]≤37 dBk
Where:
ERP[Max]=Maximum Effective Radiated Power measured in decibels above 1 kW
(dBk).
HAAT=Height Above Average Terrain measured in meters.
The boundaries specified are to be used to determine the maximum possible
combination of antenna height and ERP[dBk]. When specifying an
ERP[dBk]less than that permitted by the lower boundary, any antenna HAAT can
be used. Also, for values of antenna HAAT greater than 2,300 meters the
maximum ERP is the lower limit specified for each equation.
(6) The effective radiated power in any horizontal or vertical direction may
not exceed the maximum values permitted by this section.
(7) The effective radiated power at any angle above the horizontal shall be
as low as the state of the art permits, and in the same vertical plane may
not exceed the effective radiated power in either the horizontal direction
or below the horizontal, whichever is greater.
(c) Determination of applicable rules. The zone in which the transmitter of
a television station is located or proposed to be located determines the
applicable rules with respect to maximum antenna heights and powers for VHF
stations when the transmitter is located in Zone I and the channel to be
employed is located in Zone II, or the transmitter is located in Zone II and
the channel to be employed is located in Zone I.
[ 28 FR 13660 , Dec. 14, 1963, as amended at 42 FR 20823 , Apr. 22, 1977; 42 FR 48881 , Sept. 26, 1977; 47 FR 35990 , Aug. 18, 1982; 50 FR 23698 , June 5,
1985; 56 FR 49707 , Oct. 1, 1991; 58 FR 51250 , Oct. 1, 1993]
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.