Goto Section: 2.925 | 2.927 | Table of Contents
FCC 2.926
Revised as of October 1, 2007
Goto Year:2006 |
2008
Sec. 2.926 FCC identifier.
(a) A grant of equipment authorization issued by the Commission will list
the validated FCC Identifier consisting of the grantee code assigned by the
FCC pursuant to paragraph (b) of this section, and the equipment product
code assigned by the grantee pursuant to paragraph (c) of this section. See
Sec. 2.925.
(b) The grantee code assigned pursuant to paragraph (c) of this section is
assigned permanently to applicants/grantees and is valid only for the party
specified as the applicant/grantee in the code assignment(s).
(c) A grantee code will have three characters consisting of Arabic numerals,
capital letters, or combination thereof. A prospective grantee or his
authorized representative may receive a grantee code electronically via the
Internet at https://gullfoss2.fcc.gov/prod/oet/cf/eas/index.cfm. The code
may be obtained at any time prior to submittal of the application for
equipment authorization. However, the fee required by Sec. 1.1103 of this
chapter must be submitted and validated within 30 days of the issuance of
the grantee code, or the code will be removed from the Commission's records
and a new grantee code will have to be obtained.
(1) After assignment of a grantee code each grantee will continue to use the
same grantee code for subsequent equipment authorization applications.
In the event the grantee name is changed or ownership is transferred, the
circumstances shall be reported to the Commission so that a new grantee code
can be assigned, if appropriate. See Sec. Sec. 2.934 and 2.935 for additional
information.
(2) [Reserved]
(d) The equipment product code assigned by the grantee shall consist of a
series of Arabic numerals, capital letters or a combination thereof, and may
include the dash or hyphen (-). The total of Arabic numerals, capital
letters and dashes or hyphens shall not exceed 14 and shall be one which has
not been previously used in conjunction with:
(1) The same grantee code, or
(2) An application denied pursuant to Sec. 2.919 of this chapter.
(e) No FCC Identifier may be used on equipment to be marketed unless that
specific identifier has been validated by a grant of equipment authorization
issued by the Commission. This shall not prohibit placement of an FCC
identifier on a transceiver which includes a verified receiver subject to
Sec. 15.101, provided that the transmitter portion of such transceiver is
covered by a valid grant of type acceptance or certification. The FCC
Identifier is uniquely assigned to the grantee and may not be placed on the
equipment without authorization by the grantee. See Sec. 2.803 for conditions
applicable to the display at trade shows of equipment which has not been
granted equipment authorization where such grant is required prior to
marketing. Labelling of such equipment may include model or type numbers,
but shall not include a purported FCC Identifier.
[ 44 FR 17179 , Mar. 21, 1979, as amended at 46 FR 21014 , Apr. 8, 1981; 52 FR 21687 , June 9, 1987; 54 FR 1698 , Jan. 17, 1989; 62 FR 10471 , Mar. 7, 1997;
69 FR 54033 , Sept. 7, 2004]
Conditions Attendant to an Equipment Authorization
Goto Section: 2.925 | 2.927
Goto Year: 2006 |
2008
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public