Goto Section: 15.247 | 15.250 | Table of Contents
FCC 15.249
Revised as of October 1, 2007
Goto Year:2006 |
2008
Sec. 15.249 Operation within the bands 902–928 MHz, 2400–2483.5 MHz, 5725–5875
MHZ, and 24.0–24.25 GHz.
(a) Except as provided in paragraph (b) of this section, the field strength
of emissions from intentional radiators operated within these frequency
bands shall comply with the following:
Fundamental frequency Field strength of fundamental (millivolts/meter) Field
strength of harmonics (microvolts/meter)
902–928 MHz 50 500
2400–2483.5 MHz 50 500
5725–5875 MHz 50 500
24.0–24.25 GHz 250 2500
(b) Fixed, point-to-point operation as referred to in this paragraph shall
be limited to systems employing a fixed transmitter transmitting to a fixed
remote location. Point-to-multipoint systems, omnidirectional applications,
and multiple co-located intentional radiators transmitting the same
information are not allowed. Fixed, point-to-point operation is permitted in
the 24.05–24.25 GHz band subject to the following conditions:
(1) The field strength of emissions in this band shall not exceed 2500
millivolts/meter.
(2) The frequency tolerance of the carrier signal shall be maintained within
±0.001% of the operating frequency over a temperature variation of -20
degrees to +50 degrees C at normal supply voltage, and for a variation in
the primary supply voltage from 85% to 115% of the rated supply voltage at a
temperature of 20 degrees C. For battery operated equipment, the equipment
tests shall be performed using a new battery.
(3) Antenna gain must be at least 33 dBi. Alternatively, the main lobe
beamwidth must not exceed 3.5 degrees. The beamwidth limit shall apply to
both the azimuth and elevation planes. At antenna gains over 33 dBi or
beamwidths narrower than 3.5 degrees, power must be reduced to ensure that
the field strength does not exceed 2500 millivolts/meter.
(c) Field strength limits are specified at a distance of 3 meters.
(d) Emissions radiated outside of the specified frequency bands, except for
harmonics, shall be attenuated by at least 50 dB below the level of the
fundamental or to the general radiated emission limits in Sec. 15.209, whichever
is the lesser attenuation.
(e) As shown in Sec. 15.35(b), for frequencies above 1000 MHz, the field
strength limits in paragraphs (a) and (b) of this section are based on
average limits. However, the peak field strength of any emission shall not
exceed the maximum permitted average limits specified above by more than 20
dB under any condition of modulation. For point-to-point operation under
paragraph (b) of this section, the peak field strength shall not exceed 2500
millivolts/meter at 3 meters along the antenna azimuth.
(f) Parties considering the manufacture, importation, marketing or operation
of equipment under this section should also note the requirement in
Sec. 15.37(d).
[ 54 FR 17714 , Apr. 25, 1989, as amended at 55 FR 25095 , June 20, 1990; 67 FR 1625 , Jan. 14, 2002]
Goto Section: 15.247 | 15.250
Goto Year: 2006 |
2008
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public