Sec.  1.958   Distance computation.

   The  method given in this section must be used to compute the distance
   between  any  two  locations, except that, for computation of distance
   involving stations in Canada and Mexico, methods for distance computation
   specified in the applicable international agreement, if any, must be used
   instead. The result of a distance calculation under parts 21 and 101 of this
   chapter must be rounded to the nearest tenth of a kilometer. The method set
   forth  in this paragraph is considered to be sufficiently accurate for
   distances not exceeding 475 km (295 miles).

   (a)  Convert the latitudes and longitudes of each reference point from
   degree-minute-second format to degree-decimal format by dividing minutes by
   60 and seconds by 3600, then adding the results to degrees.
   [er13ap05.008.gif]

   (b) Calculate the mean geodetic latitude between the two reference points by
   averaging the two latitudes:
   [er13ap05.009.gif]

   (c) Calculate the number of kilometers per degree latitude difference for
   the mean geodetic latitude calculated in paragraph (b) of this section as
   follows:

   KPD[lat]= 111.13209 − 0.56605 cos 2ML + 0.00120 cos 4ML

   (d) Calculate the number of kilometers per degree of longitude difference
   for the mean geodetic latitude calculated in paragraph (b) of this section
   as follows:

   KPD[lon]= 111.41513 cos 5ML − 0.09455 cos 3ML + 0.00012 cos 5ML

   (e) Calculate the North-South distance in kilometers as follows:

   NS = KPD[lat]× (LAT1[dd]− LAT2[dd])

   (f) Calculate the East-West distance in kilometers as follows:

   EW = KPD[lon]× (LON1[dd]− LON2[dd])

   (g) Calculate the distance between the locations by taking the square root
   of the sum of the squares of the East-West and North-South distances:
   [er13ap05.010.gif]

   (h) Terms used in this section are defined as follows:

   (1)  LAT1[dd]and  LON1[dd]are the coordinates of the first location in
   degree-decimal format.

   (2)  LAT2[dd]and LON2[dd]are the coordinates of the second location in
   degree-decimal format.

   (3) ML is the mean geodetic latitude in degree-decimal format.

   (4) KPD[lat]is the number of kilometers per degree of latitude at a given
   mean geodetic latitude.

   (5) KPD[lon]is the number of kilometers per degree of longitude at a given
   mean geodetic latitude.

   (6) NS is the North-South distance in kilometers.

   (7) EW is the East-West distance in kilometers.

   (8) DIST is the distance between the two locations, in kilometers.

   [ 70 FR 19306 , Apr. 13, 2005]